Page 1 of 1
WANTED: engine mount brackets
Posted: Wed Sep 14, 2011 8:44 am
by slowquest
I'm looking for a set of the brackets that bolt to the block on a 2.0L Starion. If anyone has a part number, that would be great also.
Can trade USDM parts if you'd like.
Posted: Wed Sep 14, 2011 4:09 pm
by JDSTAZ45
G'day,
Welcome to Austarion :)
There was a group buy on these things about 18 months back. 1320ft should be able to help out. I bought a set! They are not standard rubber but in red polyurethane....
What parts do you have up for grabs?? :D Any used TD05 turbos and/or exhaust housings?
Rear quarters perhaps??
:beer
Posted: Wed Sep 14, 2011 10:13 pm
by Lummy
I'm not sure that he's after the engine mounts themselves, but the bracket that fits to the engine block and sits on the mount. That's the way I read it anyway.
Posted: Thu Sep 15, 2011 12:09 am
by slowquest
Yes, the bracket is what I'm after, not the mount with the rubber.
Us "Yanks" are doing a few 4G64 swaps, which you guys got stock, and there's some concern over what brackets to use. Some guys say to use the mounts off of the trucks that we pull the engine from, but those tend to shove the engine off to the side and at an angle. I just thought that if I could get a set of mounts that were stock with this combo, it should sit just the way Mitsubishi intended.
Posted: Thu Sep 15, 2011 12:10 pm
by redzone
I have multiple sets of these, I would swap a quantity for a 5 stud conversion, pm me & i'll explain what i'm after..
Posted: Fri Sep 16, 2011 12:15 am
by slowquest
PM sent
Posted: Fri Sep 16, 2011 12:24 am
by slowquest
JDSTAZ45 wrote:G'day,
What parts do you have up for grabs?? :D Any used TD05 turbos and/or exhaust housings?
Rear quarters perhaps??
:beer
I've got a few TD05 turbos, but all need rebuilt. They are all stock 12A turbos off the USDM G54B. I've also got one set of flared rear quarters, and three sets of front flared fenders. But I can't even imagine what it would cost to ship those.
Posted: Sun Sep 18, 2011 10:54 am
by redzone
where are u located in the usa?
Posted: Sun Sep 18, 2011 1:45 pm
by JDSTAZ45
slowquest wrote:
I've got a few TD05 turbos, but all need rebuilt. They are all stock 12A turbos off the USDM G54B. I've also got one set of flared rear quarters, and three sets of front flared fenders. But I can't even imagine what it would cost to ship those.
If you are happy to send the rear quarters to Ontario, California 91762 to a shipping/importer then happy to talk turkey :D Any idea of cost to transport to California??
Willing to grab one of those td05 turbos that require a rebuild. Exhaust housing needs to be 080 or in other words, 8cm2!
Please send us a PM with prices.... :beer
Posted: Sun Sep 18, 2011 2:21 pm
by slowquest
redzone wrote:where are u located in the usa?
Cincinnati, Ohio
Posted: Sun Sep 18, 2011 2:23 pm
by slowquest
JDSTAZ45 wrote:slowquest wrote:
I've got a few TD05 turbos, but all need rebuilt. They are all stock 12A turbos off the USDM G54B. I've also got one set of flared rear quarters, and three sets of front flared fenders. But I can't even imagine what it would cost to ship those.
If you are happy to send the rear quarters to Ontario, California 91762 to a shipping/importer then happy to talk turkey :D Any idea of cost to transport to California??
Willing to grab one of those td05 turbos that require a rebuild. Exhaust housing needs to be 080 or in other words, 8cm2!
Please send us a PM with prices.... :beer
I'll get a quote for shipping on Monday. I'll double check the turbos, I know they are all stock USDM parts, but not sure they are 8cm2