Page 1 of 1
wtb ja handbrake cable
Posted: Sat May 14, 2011 8:12 am
by jzma70
As per title must be 100 % UNSEIZED and both lh and rh will fit I have 4 cables 1 works, thanks guys[/b]
Re: wtb ja handbrake cable
Posted: Sat May 14, 2011 3:25 pm
by enthuzed
jzma70 wrote:I have 4 cables 1 works, thanks guys[/b]
Sounds too familiar. Have you tried soaking them in kero, using penetrene, Wd40, freeze spray and the likes? And a fair bit of wrestling too... :roll:
Posted: Sat May 14, 2011 8:23 pm
by jzma70
Yrp tried for a good hour with wd spray man whet else helps?
Posted: Sun May 15, 2011 7:41 pm
by Alspos
Hang it up and let the wd40 run down the cable. Leave it a day or so topping it up with wd40 every now and then. Then try and pull the cable loose. Or you can also put one end of the cable in a vice, hold the other end of the cable and try to move the sheath instead, you can get a better hold on the outside. Try twisting it also, in the direction of the cable twist so you're not opening the cable up as you twist (tighten it instead, you'll see what I mean)
Posted: Mon May 16, 2011 7:09 pm
by redzone
or you could just get the cable redone???
Posted: Tue May 17, 2011 5:46 pm
by Sonic
I may have a good one there. I will check for you.
Posted: Tue May 17, 2011 6:57 pm
by jzma70
thamks mang