Page 1 of 1
WTB Sydney Air intake
Posted: Wed Feb 23, 2011 6:13 pm
by starionc
Does anyone have or know where I can get an intake for a JA with a TC06 to fit a pod filter? Going on a rally car so needs to be strong more so then pretty rofl
Cheers Jason
Posted: Fri Feb 25, 2011 1:17 pm
by panda
Jason, thats makes 2 of us. Any more for a GB ?
panda
Posted: Fri Feb 25, 2011 4:25 pm
by enthuzed
Make one.
Or try a Ford F150 one, Redzone reckons they're a direct fit.
Air intake
Posted: Wed Mar 02, 2011 7:11 pm
by starionc
I made one today with 2 parts from auto-barn and a length of 3 inch pipe.
panda the part number for the silicone bend is D1-SH455176 It is a Drift hose and fits the tco6 at 2 inch and has a 45* bend that then flairs out to 3 inch. You need to cut the small end a bit to fit behind the power steering pump! Then the pipe and then the pod!
SAAS part number SF-595130CBT
It's a cleanable one and with the silicone hose and the recharge kit it cost $98. The pipe was an off cut and cost nothing!!!
I have sent pics to Rob so that he can put them up for me in the other post.
http://forums.austarion.com/viewtopic.php?t=13633
I hope this helps mate. :beer :beer
Posted: Wed Mar 02, 2011 10:13 pm
by redzone
enthuzed wrote:Make one.
Or try a Ford F150 one, Redzone reckons they're a direct fit.
ummmm no i dont, what it was, is that i use a small section from a 6 cyl early 80's F250 lower radiator hose to repair the stock starion intake pipe when they crack... nothing to do with fitting a pod!
Posted: Wed Mar 02, 2011 11:34 pm
by enthuzed
Okay, got that a bit wrong :roll: *slinks away quietly towards the dunce corner*
Posted: Thu Mar 03, 2011 8:53 am
by panda
thanks starionc for that info, I will follow that up.