Page 1 of 2

Sydney August Garage Sale

Posted: Sat Jul 31, 2010 6:44 pm
by thrash
Hi All,

Over the years I've collected a lot of stuff I realise I will never use, and as a result, the following things are up for sale. Please note that the prices listed are either what I have paid for them, what I would pay for them, what i've seen others pay for them, and if all else fails, an educated guess.. so.. if you see something you want, and want to offer a lower price, pm me, and I may consider it if it's reasonable :)

items are located in Parramatta - Sydney, NSW. Also able to post most of the stuff except perhaps the head and the giant intercooler, and definately not able to post the bench vise


Standard L300 manifold $180
Throttle body and fuel rail are included, but no injectors

Sohc high rpm double valve springs $100
You can have the head if you are local, but it's not in the best shape

Unmodded Sonata Manifold SOLD $180
Injectors are sonata injectors - these will need to be replaced for a turbo application. I originally paid 200 for this thing.

Standard Dash Cluster $100
just under 270k kms on the clock. Seems to be in ok condition.

Autometer Boost gaugeSOLD $50
liquid filled to prevent the needle from twitching/vibrating too much

Stock Intake Pipe $100
aka acordian hose. no rips that I can see, but the turbo end is a little worn as pictured

Sohc Spark plug leads $10
bosch units

550cc rx7 injectors $250
set of 4. i have never used or flow tested them. They have been sitting around for 2 years now

vr4 intercooler $100
one side painted black. as you can see from the picture, one of the inlets has a little dent

looong intercooler $100
this will just about fit between the chassis rails - very snug fit from memory (i checked when i bought it about a year ago now)

CA18 intercooler $30
standard side mount intercooler for a ca18 powered sylvia/180. My hand is in the picture so you know how puny it is

stock exhaust manifold $100
good condition - no cracks that I can see. This was in a stock car that had no exhaust leaks and made almost 100rwkw

bench vice/viseSOLD $100
is it vise or vice?? I've seen both spellings used, but that can't be right! Anyway, this was purchased from a mechanic that was shutting down a while back. never been used by me.. extremely heavy.. and judging by the hare and forbes website, these things cost 300+ new



Pictures are below. Apologies for the crap quality

L300 mani and double valve spring head
Image
Image

Sonata mani
Image
Image

instrument cluster
Image
Image
Image
Image

Autometer Boost Gauge - the line in the gauge is not a crack - it's the level of the liquid
Image

Intake Pipe
Image
Image

Sohc Spark plug leads
Image

550cc rx7 injectors
Image


vr4 intercooler
Image
Image
Image

looong intercooler
Image
Image
Image
Image
Image

CA18 intercooler
Image

stock exhaust manifold
Image
Image
Image
Image

bench vice/vise
Image

Posted: Sat Jul 31, 2010 6:51 pm
by bridgey
what size is boost gauge? shipping cost?

Sonata Manifold

Posted: Wed Aug 04, 2010 11:13 pm
by Muz
I'll take the Sonata Manifold, PM sent.
cheers
Muz

Posted: Wed Aug 11, 2010 11:30 pm
by thrash
bridgey wrote:what size is boost gauge? shipping cost?
diameter of boost gauge window is 2.5 inches.

shipping to NZ is aud 15.00 for standard airmail with no insurance and aud 20.00 for international registered post. pm me if you want it :)

Posted: Thu Aug 12, 2010 9:38 pm
by thrash
correction, postage for the gauge is 11 or 16 aud, not 15 or 20.

Posted: Tue Aug 17, 2010 6:16 pm
by thrash
bump. first post updated.

Posted: Thu Sep 02, 2010 10:25 pm
by thrash
bump again :)

Posted: Fri Nov 12, 2010 9:19 pm
by thrash
bump a couple of months later.. still a whole lot of stuff i don't need..

Posted: Mon Nov 15, 2010 10:26 am
by panda
PM sent re intake pipe.

Posted: Mon Nov 15, 2010 8:32 pm
by thrash
pm replied to

Posted: Thu Feb 24, 2011 7:47 pm
by Gaswagon
Free bump

PM sent

Posted: Wed Apr 06, 2011 12:15 am
by SLEEPS
Whats a price for the exhaust manifold shipped to USA? 32548 area code. It is a top mount turbo manifold, correct?

Posted: Thu Apr 07, 2011 3:58 pm
by thrash
yeap, it's a top mount, rwd manifold :) I'll get a price for you.

Gaswagon, have pmed you, still awaiting response :)

Posted: Thu Apr 07, 2011 11:25 pm
by SLEEPS
Stupid question, because it is a top mount style, will I need to turn my turbo so the oil feed and oil drain lines are back to the stock locations... Being as my turbo was built for a standard down facing turbo manifold?

Posted: Sat Jul 16, 2011 2:07 pm
by thrash
bump after a long time - still have some of this stuff lol