Austarion

Chasing crank sprocket, crank key steel, the backing plate behind the crank sprockets and the spacer that the crank bolt holds the sprockets in place with. I don't have a pic. of the spacer (don't no the tech. name), as this was missing on my motor... hence the damage to the other components! Ok... don't know how to attach pics? I'll do that part in a minute... or maybe not?? A message comes up about not being able to upload for a couple of weeks? Am I doing something wrong?

Do you know if it is a long or short nose crank as there are different belt drive gears ??

I'll messure the gears and the length of the crank from the front of the block. I take a pic of the crank today and see if I can upload tonight. Thanks for the reply.

Tried Mitsubishi? I have bought these for other engines for what I thought was very reasonable money.

i should have everything mate, let me know which ones they are

crank sticks out approx 36mm, width of sprocket for balance shaft (outer edge) approx 16.6mm and main timing belt sprocket is approx 20.6mm. The spacer... no idea as it was missing. I've looked at the exploded pics of the 4g63 in the tech. section... the spacer is in the pic, but is the only part without a number, mmm! I will check with Mitsu.

Hey still chasin' long nose crank sprocket... anyone?