Page 1 of 1

WTB ASAP JB/JD turbo water lines and fittings

Posted: Tue Mar 23, 2010 8:59 pm
by JA83
hi all im in need of jb turbo water lines, banjo fittings and i believe i need the thermostat housing also (has the water outlet fitting)

i believe the thermostat housing has the water outlet, where is the water lines routed back into the cooling system after the turbo?

if you have the lines best way is to shoot me a pm or

Loran 0437866373
cheers

Posted: Tue Mar 23, 2010 9:20 pm
by RiceThief
I think you will need the pipe that goes behind the waterpump too, as that t's off to drain the turbo. If you are having trouble finding the lines, this might help. http://cgi.ebay.com.au/Turbo-Water-Kit- ... 414d58ce53

Posted: Tue Mar 23, 2010 9:22 pm
by JA83
thanks for the link mate. but youve got me worried, does the water line go back to the water pump?

Posted: Tue Mar 23, 2010 9:33 pm
by RiceThief
From my understanding of how the water system works with the turbo is the feed from your thermostat housing feeds the water for the turbo, then the waterpump sucks the water out through the pipe with the T.

Posted: Tue Mar 23, 2010 9:40 pm
by RiceThief
http://www.starquestgarage.com/manuals/ ... ooling.pdf

If you download the above link and look at page 3, thats what I have been basing my installation on. The engine is the 2.6 but I assume way the water flows is the same.

Posted: Tue Mar 23, 2010 10:55 pm
by redzone
i've definitely got the thermostat housing..

Posted: Fri Mar 26, 2010 9:56 pm
by JA83
done redzone shall transfer the funds monday, still on the lookout for the lines and banjo fittings