Noltec Camber/Caster Plates GB CLOSED $$ is Now Due
Posted: Fri May 28, 2004 7:47 pm
Noltec's Front Camber/Caster Plates
Picture is curtesy of Cookie these are the plates installed in his car (Money pit)
OK guys I am opening the GP for the Nolte's camber /Caster plates. We can get them for AU$360.00 plus AU$17.00 post (through Airmax, overnight) if we get 20 or more orders. Retail Price is AU$430.00
They offer TWO styles, A "STREET" and a "RACE" version.
The STREET version has a poly surounded spherical bearing for cushion and noise suppression. The RACE version is a SOLID steel casing for the Spherical bearing AND it add additinal NEG. Camber adjustment over the street version.
Noltec’s street adjustable strut plates permit 20mm negative/10mm positive camber and 10mm positive/10 mm negative caster adjustment and with the clubsport/RACE solid version permits a further 10mm of negative camber adjustment. These numbers are about the same as the ones I was looking at to achieve with the Mustang Plates I was working with (Camber Wise, caster was non adjustable with my design)
The strut plates can be easily adjusted by simply loosening the nuts which attach them to the strut tower. Once these clamping nuts are loosened the center slide plate can be relocated to any position in the adjustment window.Then just retighten the nuts and you are set to go.
AND YES ! They WILL work with BOTH OEM and Coil overs !
NOTE: You'll get MORE adjustement travel from coil overs than wiht OEM style springs due to limited space inside the strut tower.
So enough chit chat !
NOW.... the GP IS officially OPEN.
Thanks again to ALL of you guys for your support and for your patience.
Oscar
Member list:
1- C Fernance
2-
3-
4-
5-
6-
7-
8- Starion Club US ( 10 member )
9- Starion Club UK ( 1 member )
10- Aussie Magna Club ( 1 member )
AGAIN if you DO NOT receive an e-mail by the end of the day with this same info you are NOT in the GP or in my mailing list. So let me know and I will add you to it.
Picture is curtesy of Cookie these are the plates installed in his car (Money pit)
OK guys I am opening the GP for the Nolte's camber /Caster plates. We can get them for AU$360.00 plus AU$17.00 post (through Airmax, overnight) if we get 20 or more orders. Retail Price is AU$430.00
They offer TWO styles, A "STREET" and a "RACE" version.
The STREET version has a poly surounded spherical bearing for cushion and noise suppression. The RACE version is a SOLID steel casing for the Spherical bearing AND it add additinal NEG. Camber adjustment over the street version.
Noltec’s street adjustable strut plates permit 20mm negative/10mm positive camber and 10mm positive/10 mm negative caster adjustment and with the clubsport/RACE solid version permits a further 10mm of negative camber adjustment. These numbers are about the same as the ones I was looking at to achieve with the Mustang Plates I was working with (Camber Wise, caster was non adjustable with my design)
The strut plates can be easily adjusted by simply loosening the nuts which attach them to the strut tower. Once these clamping nuts are loosened the center slide plate can be relocated to any position in the adjustment window.Then just retighten the nuts and you are set to go.
AND YES ! They WILL work with BOTH OEM and Coil overs !
NOTE: You'll get MORE adjustement travel from coil overs than wiht OEM style springs due to limited space inside the strut tower.
So enough chit chat !
NOW.... the GP IS officially OPEN.
Thanks again to ALL of you guys for your support and for your patience.
Oscar
Member list:
1- C Fernance
2-
3-
4-
5-
6-
7-
8- Starion Club US ( 10 member )
9- Starion Club UK ( 1 member )
10- Aussie Magna Club ( 1 member )
AGAIN if you DO NOT receive an e-mail by the end of the day with this same info you are NOT in the GP or in my mailing list. So let me know and I will add you to it.