Page 1 of 1

FS [Vic] Clearing some bits...Offers

Posted: Sun Jul 26, 2009 12:39 pm
by enthuzed
There's a bit of stuff waiting for new owners...offers please...

Starion block, complete bottom end but dismantled with 0.5mm over pistons, requires thrust build up to crank and slight rebore. Motor was just worn out, would oil up one of the plugs. Had no detonation, the pistons look brand new. Decided not to rebuild this one now as I replaced it with an already finished motor.

Standard TC06-11A turbo, non-watercooled, no cracks. Condition unknown, treat as a core for rebuild.

Smaller TC05-12A with wastegate. No cracks. Also condition unknown.

Another TC06-11A, this one watercooled. Still attached to motor and I haven't run it up. Haven't even looked at it.

Three JA ECI manifolds, one good working non-leaking one, another untested and a third semi-pulled down (injector leaking issue).

Four JA brake master cylinders and reservoirs

Two power steering pumps

Three ECU's to suit JA, also a JB one

Three ignitor boxes suit JA

Two wiper motors

JA Series 11 (two-tone) brown door trims

JB burgundy rear seat and side pieces, B pillar covers, headlining.
Burgundy boot carpet and standard parcel shelf (JB door trims are gone, so too are the A pillar covers) Passenger side sunvisor with good clip.

Custom rear parcel shelf, clips in where factory one goes, is hinged and painted matt black with nice Pioneer 100w 2way 6 x 9 speakers.

Stock suspension and chassis parts

Two standard open diffs (No LSDs)

JB inlet manifold and cleaned injectors, complete JB wiring loom, ignitor box, ECU, knock box and map sensors. Crossover pipe.

JB antenna module

JB Bonnet, good nick.

Posted: Sun Jul 26, 2009 2:50 pm
by WANTSOM
and a partridge in a pear tree LOL

Posted: Sun Jul 26, 2009 8:18 pm
by Noddy
I might grab the rear parcel shelf - burgundy and sunvisor -burgundy
PM how much you want (is the parcel shelf cut with speakers?

Ta :D

Posted: Sun Jul 26, 2009 11:02 pm
by enthuzed
Noddy wrote:I might grab the rear parcel shelf - burgundy and sunvisor -burgundy
PM how much you want (is the parcel shelf cut with speakers?

Ta :D
Shelf not cut, and you have mail.

Sorry Wantsom, fresh out of Pear trees, getting a mold made for the partridge when I can find a good specimen. Or is that mould?

Posted: Mon Jul 27, 2009 9:07 am
by madeofmilo
do you have any rust free front quater panels? Cheers Dave

Posted: Mon Jul 27, 2009 9:24 pm
by MitsuMadness
Hiya!! I might be interested in a diff, always handy to have more, especially with what I plan on doing :D

Oh and do any of your brake master cylinders have the booster still on them? Could use a spare of those if one's going too.

Posted: Wed Jul 29, 2009 8:05 pm
by enthuzed
Dave, sorry no 1/4 panels spare. Keeping the ones I've got.
Responded to all posts/emails now, please check your mail.

Posted: Sun Aug 09, 2009 2:33 pm
by enthuzed
Gentlemen, your goods are packaged up and going in the post tomorrow.
Do we have some other interested parties.

Re: FS [Vic] Clearing some bits...Offers

Posted: Mon Aug 10, 2009 9:54 pm
by bigmoz
enthuzed wrote: Stock suspension and chassis parts

how much?

moz

Posted: Mon Aug 10, 2009 10:02 pm
by paradox
is the antenna all working? got a broken one with my car

Posted: Tue Aug 11, 2009 9:20 pm
by Entaran
How much for the block and where are you in melb?

Posted: Tue Aug 11, 2009 9:25 pm
by redzone
pm me a price for all your TC06's that have uncracked exhaust housings :)

Posted: Wed Aug 12, 2009 7:35 pm
by stouty
Interested in one of the master cylinders PM'd you.

Cheers

Posted: Sun Aug 23, 2009 9:32 pm
by enthuzed
Stouty, Enteran and Redzone, you guys have mail.
Paradox, only have a crappy aftermarket aerial so it wont suit you.
Bigmoz, please PM me the exact components you require.

Thanks guys.