does anybody have a good set of distributor leads?
i thought id check to see if anyone had a set all correct before i went and made some
WTB distributor leads
WTB distributor leads
87 GSR-V, Factory DASH, Rebuilt bottom end with arp rod bolts and balance shafts removed, head reconed with 3 angle valve grind, TD05 housing machined out to take Garrett T4 internals, rebuilt and cryoed gearbox
sorry i wasn't clear, they do not sell sets for the starion motor over here so to buy some i will have to take all mine off to piece together a set from several different lengths which can be quite expensive
87 GSR-V, Factory DASH, Rebuilt bottom end with arp rod bolts and balance shafts removed, head reconed with 3 angle valve grind, TD05 housing machined out to take Garrett T4 internals, rebuilt and cryoed gearbox
-
- Enthusiast
- Posts: 605
- Joined: Thu Apr 06, 2006 2:21 pm
- Location: Christchurch,New Zealand
-
- nearly postwhore
- Posts: 1446
- Joined: Sun Jun 19, 2005 7:27 pm
- Location: Sunny Brisbane Australia!
ehh??? what are you smoking??
Go buy leads for a Cordia, Sigma, Galant.. anything with a SOHC 4G62 or 4G63 motor, shit even 4G32 and 4G37 will almost be identical - the actual spark plug leads will be the same, the only difference will be the length of the coil to distributor lead.
Or go to Supercheap and buy those bosch leads seperately, they are about $6 each regardless of length.
Go buy leads for a Cordia, Sigma, Galant.. anything with a SOHC 4G62 or 4G63 motor, shit even 4G32 and 4G37 will almost be identical - the actual spark plug leads will be the same, the only difference will be the length of the coil to distributor lead.
Or go to Supercheap and buy those bosch leads seperately, they are about $6 each regardless of length.
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
Who is online
Users browsing this forum: No registered users and 71 guests