EOI - MPI DASH motor
Posted: Mon Mar 16, 2009 11:02 am
The time will be coming in the next few months to sell off my current DASH motor to make way for the Twin Cam being built atm.
Specs on the motor and what will be included are -
Balanced bottom end with forged pistons
Balance shafts removed.
DASH 12 Valve head (mild porting and increased lift)
Custom MPI Inlet manifold
Siemens 610cc injectors
Split pulse exhaust manifold
Tomei Adjustable cam gear
MSD DIS2 CDI ignition
Magnecor R100 plugs
Twin coil setup
Haltech E6A ECU and all wiring, programs and maps
2 spares heads and 1 DASH spare rocker cover
This motor produces 198kw atw on 20psi and is basically a bolt in. It should be available around late May early June. Can hear running in car if needed before it comes out.
Offers over $3500 will be considered but it will not be separated.
Giving a heads up on this so any interested parties can get their finances, cash, wives, girlfriends sorted in advance.
pm for any further info or with your interest
Specs on the motor and what will be included are -
Balanced bottom end with forged pistons
Balance shafts removed.
DASH 12 Valve head (mild porting and increased lift)
Custom MPI Inlet manifold
Siemens 610cc injectors
Split pulse exhaust manifold
Tomei Adjustable cam gear
MSD DIS2 CDI ignition
Magnecor R100 plugs
Twin coil setup
Haltech E6A ECU and all wiring, programs and maps
2 spares heads and 1 DASH spare rocker cover
This motor produces 198kw atw on 20psi and is basically a bolt in. It should be available around late May early June. Can hear running in car if needed before it comes out.
Offers over $3500 will be considered but it will not be separated.
Giving a heads up on this so any interested parties can get their finances, cash, wives, girlfriends sorted in advance.
pm for any further info or with your interest