Austarion

In app 6 weeks my existing head will be for sale
SPECS ARE AS FOLLOWS were carried out on a NEW bare head
1 port & polish
2 cc chambers
3 std inlet valves
4 3mm os ex valves
5 double valve springs
6 35-70 Ralliart copy cam
7 3mm os ex ports (same size as a 64 head )
8 custom inlet manifold with bellmouths in the plenum port matched to the head &HPC coated
9 580cc injectors recently cleaned & tested
10 60 mm magna tb
11 steampipe HPC coated ex manifold t3 flange

NOTE this combo has made 280 hp ATW at 18psi on a tired bottom end and 328 hp ATW on my stroker
GENUINE buyers enquiries welcome :D
Dreamers, tossers & time wasters will become starring partners for my mate Wanderlay :glare: LOL :

hi mate, are you willing to seperate? if so, what would you be asking for just the inlet setup? if not, what would you be asking for the complete package?

wildlines wrote:hi mate, are you willing to separate? if so, what would you be asking for just the inlet setup? if not, what would you be asking for the complete package?

will separate as a last resort but this combo is a proven performer
Will do the sums and post the costs involved for each item and you can pm me with your offer

Got some pics and an idea of what you want for it?

enthuzed wrote:Got some pics and an idea of what you want for it?

To see pics of the old 2 litre in action go to Cruises & Events page 2 and click on"Link to Gatton Sprint video . NOTE I have a 3.9 lsd and that was both wheels spinning :D
Go to C&E Page 4 "pics of starion cruise for engine bay shots Note the bottom half of the manifold is L300 PORTED & the rest consists of 90 deg mandrel bent runners with bellmouths inside the plenum all hpc coated with a 60mm tb
AM doing costings ATM

Here is the breakdown of what it cost me
1 new bare head (just priced one today $700 trade ) $500
2 port,polish ,cc chambers, std in & 3mm os ex valves ,enlarge ex ports 3mm diameter & double valve springs $700
3 rallyart copy cam $275
4 L 300 manifold port matched to head $80
5 custom plenum & runners $350
6 hpc no5 above $85
7 60mm tb $85
TOTAL $2075
Feel free to pm or ph me 0409729177 with your sensible offers
Rad
PS 580CC INJECTORS NOT INCLUDED BUT I COULD BE PERSUADED :)
If I need bigger inj 4 the TC they will be up for grabs :)

u have pm regarding rallyart copy cam

hey mate not trying to be smart ass but im making 269hp at the wheels with a bog stock head and a 1.8L bottom end... so yeah

you may have that much power, but I assume you have other supporting mods to get you there.

Rad stated that these figures hit 280 hp ATW with a 2.0litre, and 328 hp ATW with the stroker. All on a TIRED bottom end.

And although you said "not trying to be smart ass", the way you said it made you sound like a complete "smart ass". So yeah. rofl

siggy_gsr wrote:hey mate not trying to be smart ass but im making 269hp at the wheels with a bog stock head and a 1.8L bottom end... so yeah

sounds like happy dyno syndrome to me

siggy_gsr wrote: im making 269hp

when are you makin it?

Siggy "not being a smart ass so yes I am" GSR wrote:

im making 269hp at the wheels with a bog stock head and a 1.8L bottom end... so yeah

Coughbullshitcough :roll:

Just back from holiday in NZ so a big thanks to Dave,Greg & Adam for your support and posts re my head while I was away :beer

Am willing to separate if need be
Head is off and being checked & serviced atm so what do you guys want /need :)
HAVE A LOOK AT WHAT IT COSTS IN MY PREVIOUS POST AND MAKE GENUINE OFFERS PLEASE
Cheers
Rad

Rad, i'll ring you again tomorrow.


As good as sold fellas :)

Jeremy