JA & JB parts to go - trim, mechanicals, electrical
Posted: Fri Jan 16, 2009 9:34 pm
I've been considering just how much stuff I've accumulated and would like to free up some space (in my mind as well).
Some of the stuff that comes to this said mind is as follows:
Four JA ECI manifolds, from good working non-leaking through to the big unknown and semi-pulled down.
Four JA brake master cylinders and reservoirs, don't need that many.
Three ECU's to suit JA/JB
Three ignitor boxes suit JA
JA Two tone brown door trims, cant remember if they were series 1 or 11.
JB electric mirrors, pass side casting is broken but otherwise complete.
JB burgundy rear seat and side pieces, B pillar covers, headlining.
Before you ask, JB door trims are gone, as are the A pillar covers and sunvisors.
Custom rear parcel shelf, hinged and painted matt black with cutouts to suit 6 x 9 speakers.
JB antenna module, other little bits.
Got suspension and chassis parts, but they're all stock.
Probably should get rid of some JA wheels as well.
Reckon I could rustle up an open diff or two.
I might part with a JB inlet manifold and cleaned injectors, ditto for the complete JB wiring loom, ignitor box and the bonnet but I'll want good coin for these. I'm unsure if I want to keep them or not.
I know there's more, but that's a start at least.
Try me - offers please ladies and gentlemen.
Some of the stuff that comes to this said mind is as follows:
Four JA ECI manifolds, from good working non-leaking through to the big unknown and semi-pulled down.
Four JA brake master cylinders and reservoirs, don't need that many.
Three ECU's to suit JA/JB
Three ignitor boxes suit JA
JA Two tone brown door trims, cant remember if they were series 1 or 11.
JB electric mirrors, pass side casting is broken but otherwise complete.
JB burgundy rear seat and side pieces, B pillar covers, headlining.
Before you ask, JB door trims are gone, as are the A pillar covers and sunvisors.
Custom rear parcel shelf, hinged and painted matt black with cutouts to suit 6 x 9 speakers.
JB antenna module, other little bits.
Got suspension and chassis parts, but they're all stock.
Probably should get rid of some JA wheels as well.
Reckon I could rustle up an open diff or two.
I might part with a JB inlet manifold and cleaned injectors, ditto for the complete JB wiring loom, ignitor box and the bonnet but I'll want good coin for these. I'm unsure if I want to keep them or not.
I know there's more, but that's a start at least.
Try me - offers please ladies and gentlemen.