Page 1 of 2

Outcast Horizon Parts GP

Posted: Fri Jan 09, 2009 10:20 am
by Outcast01
Hey Guys. some of you may know know me from the StarquestClub site. Im running a GP of the radio kits and air diversion panels I make for the Starions. heres all the info for it:

Looking to see if people are interested in a GP for the Radio Kits and Air Diversion Pannels I make. Ive also been working on a double din kit and a radio deletion kit.

This is going to end on January 30, 2009

Image
Air Diversion Pannel
10 = $55.00
20 = $47.50
30 = $45.00

Image
Radio Kit; No Gauge Holes
10 = $28.50
20 = $21.00
30 = $18.50

Image
Radio Kit; 3 Gauge Holes (Bellow Radio)
10 = $29.50
20 = $22.00
30 = $19.50

Radio Kit; 3 Gauge Holes (Above Radio)
10 = $29.50
20 = $22.00
30 = $19.50

Radio Kit; Double Din
10 = $28.50
20 = $21.00
30 = $18.50

Powder Coating for Radio kits$5
Gloss Red
Gloss Orange
Gloss Yellow
Gloss Green
Gloss Blue
Gloss Black
Grey
Gunmetal (lots of different coloered metalics in this)
Screamin Eagle (textured Black, kinda Semi gloss, very nice finish)
Flat Black

Shipping is an extra $20 since Im in the states :( . There is also the option of having me powder coat the radio kits for an extra $5. The Double Din kit is just a trim peice. It is not ment to hold the radio. Most Double Din decks are bolted in which means you guys would have to drill your side brakets to mount the deck.

Im going to post this up on the other sites to try and get as many people going as posible to get everyone the best price.

Radio Kit; No Holes:
1. dmyers151 (SQC) PAID
2. Dart67 (SQC) PAID
3. lamlew (SQC)
4. dirty sanchez (AUS) PAID
5.
6.
7.
8.
9.
10.

Radio Kit; 3 holes Below Deck:
1. lepore (SQC)
2. mdbgracing + powder coating (SQC) PAID
3. Greg + powder coating (SQC)
4. helrar70 (SQC)
5. SpoolinTurbo (SQC)
6. CaliconquestAlex (SQC) PAID
7. newquest86 (SQC) PAID
8. jody1 + powder coating (SQC)
9. Jcizzle61 + Powder Coating (SQC) PAID
10. Slydogg (SQC) PAID

Radio Kit; 3 hole above deck:
1. PSU_Crash (SQC) PAID
2. Ono (SQC) PAID
3. Mix_67 (SQC)
4. slowspyder (SQC)
5. JD_Stazza_Brendan + Powder Coating (AUS) PAID
6. BMWTech + Powder Coating(SQC)PAID
7. BMWTech (SQC)PAID
8. toofast + Powder Coating (SQC)
9. dirty sanchez (AUS) + Powder Coating PAID
10. Hernz + Powder Coating (SQC) PAID
11. MC23 PAID

Not Sure:
87QuestKS (SQC)

Air Diversion Pannel:
1. CaliConquestAlex (SQC) PAID
2. Dstar88 (SQC)
3. Dart67 (SQC) PAID
4. JD_Stazza_Brendan (AUS) PAID
5. MR Bender(AUS)PAID
6. iGSR_VR (G54B)
7. iGSR_VR (G54B)
8. jody1 (SQC)
9. newquest86 (SQC) PAID
10. dmyers151 (SQC) PAID
11. BMWTech (SQC)PAID
12. dirty sanchez (AUS) PAID
13. slydogg (SQC) PAID

Radio Harness $10
1. lamlew (AUS)
2. spoolinturbo
3. jody1 (SQC)
4. psucrash (SQC) PAID
http://outcasthorizon.com/starquest/sqcgp.html

Posted: Fri Jan 09, 2009 10:27 am
by JD_Stazza_Brendan
Im interested in the Air Diversion panel and Radio Kit. Have you gotten any shipping quotes done to Australia? thats my main concern. Thanks.

Posted: Fri Jan 09, 2009 10:37 am
by MR Bender
Im interested in the Air Diversion panel too

Posted: Fri Jan 09, 2009 10:39 am
by Outcast01
Shipping is an extra $20 (USC). can you please specify which radio kit you would like, I make four different ones :P

Posted: Fri Jan 09, 2009 1:58 pm
by RiceThief
So the extra $20 shippin to Australia is for the whole package? Ie if i buy an air diversion plate and the radio blanking plate, its an extra $20 on the total? Or is it an extra $20 on each item?

Thanks

Posted: Fri Jan 09, 2009 2:42 pm
by JD_Stazza_Brendan
So I want an
Air diverson panel = $55 (at the moment)
Radio kit, 3 gauge above radio = $29.50 (at the moment)

It would be
55.00
+29.50
+20 shipping
=104.50 USD
Correct? if so put me down for those peices , thanks

Posted: Sat Jan 10, 2009 1:43 am
by Outcast01
I put all the goodies into on box so that the shipping is flat rate for all the stuff you get.

Im also going to extend this out till January 30.

Posted: Sat Jan 10, 2009 4:52 pm
by www.18u
I would be interested in the diversion panel also. I think you might want to check that it will be allowed to be shipped due to its size first.

Good on you for offering us guys some parts :beer

Posted: Sun Jan 11, 2009 12:49 am
by thrash
I'm up for a radio kit with no gauge holes.. I would be putting switches there..

what's the radio harness for $10?

Posted: Wed Jan 14, 2009 6:11 am
by Outcast01
thrash wrote:I'm up for a radio kit with no gauge holes.. I would be putting switches there..

what's the radio harness for $10?
If your factory radio plug hasnt been cut out it lets you install the new deck with out hacking the harness. some people like to keep the new aftermarket deck they put into cars and reinstall the factory if/when they sell the car so this gives you that option.

Posted: Fri Jan 30, 2009 6:38 am
by Outcast01
list updated.

Posted: Tue Feb 03, 2009 3:48 am
by Outcast01
Ok guys, link is up for the payments page. Let me know if there is anything else you need.

http://outcasthorizon.com/starquest/sqcgp.html

Posted: Tue Feb 03, 2009 7:14 pm
by MR Bender
um i dont have paypal can anyone help me pay for it
as in if you have paypal can i sent you the money by netbank and then you pay for the thing i want? any takers?? can anyone help me??

Posted: Fri Feb 06, 2009 5:17 pm
by Outcast01
if you have a credit card or a bank ATM card my paypal set up will let you pay with that. Just another option for you ;)

Posted: Thu Feb 12, 2009 1:28 am
by Outcast01
List has been updated. Im still waiting on a lot of people to pay.