Page 2 of 3
Posted: Thu Feb 23, 2012 3:49 am
by WidebodyWoody
So removing the brake dust shields helps keep the pads cool I take it?
Posted: Sat Feb 25, 2012 8:55 am
by 4g6beat
count me in for slotted disk rear 5 studs, thanks pete! :D
Posted: Sun Feb 26, 2012 12:07 am
by WidebodyWoody
hey mate, sorry but was talking with my mate who is doing the mods for me, and we have decided to not do this, but do a full conversion of the brake system after we get the motor going. Cheers.
Posted: Tue Feb 28, 2012 8:05 am
by JJH
If this happens, I'm just in for fronts now; just bought rears from Mick :D
Posted: Tue Feb 28, 2012 12:17 pm
by TOMSUN
First post updated.
Still pushing on with this..
Posted: Wed Feb 29, 2012 7:20 pm
by TOMSUN
Guys, please confirm if your in or out and if you want front, back or both. Also pick slotted, cross-drilled or slotted and cross-drilled.
Have spoken to Aaron and he said that we can use the VPW container that comes out of California to save some money on shipping costs. :beer Thanks mate!!!
If you haven't already done it, check out some of their stuff they sell...
http://www.vpw.com.au/
HURRY, AS I DON'T PLAN ON DOING ANOTHER GB FOR ROTORS SO GET IN ON IT AND SAVE SOME CASH!!!
:beer
Posted: Thu Mar 01, 2012 1:55 pm
by jk
Mate, I confirm rear only, 5 stud with slots only.
Thanks for all your efforts so far too.
Posted: Thu Mar 01, 2012 4:12 pm
by NXTIME
Unfortunately, I am out.
Posted: Thu Mar 01, 2012 11:03 pm
by TOMSUN
Thanks guys... First post updated.
Posted: Sun Mar 04, 2012 1:16 pm
by JJH
Measured my rotors today and found I've still got 2.5mm before they're unroadworthy, so I'm out.
Thanks for finding these Pete.
Posted: Sun Mar 04, 2012 4:16 pm
by TOMSUN
JJH wrote:Measured my rotors today and found I've still got 2.5mm before they're unroadworthy, so I'm out.
Thanks for finding these Pete.
No prob.
First post updated
Posted: Sun Mar 04, 2012 5:58 pm
by 1320ft
Pete, make mine drilled & slotted. (weight reduction)
Posted: Sun Mar 04, 2012 7:13 pm
by TOMSUN
1320ft wrote:Pete, make mine drilled & slotted. (weight reduction)
First post updated
Posted: Sat Mar 10, 2012 10:35 am
by TOMSUN
Bump. First post updated.
dirtygalant
burzman
4g6beat
please check your PM's
Posted: Tue Mar 13, 2012 4:29 pm
by 4g6beat
Hi Tried confirming via private message but got errors so i'm confirming in here, 5 stud rears slotted, let me know when you need the $$ and i'll put it through.
thanks Pete! :beer