FS: JA Starion parts, TO4 Turbo, Simmons - NEW PICS
FS: JA Starion parts, TO4 Turbo, Simmons - NEW PICS
I have had alot of offers for a number of parts, so I am now selling car off in parts. I need the garage cleared.
CAR SOLD
parts still left:
- one standard 3.55 open JA diff $100
- gearboxes: two left $200 each
- rear hatches $100
- hatch struts, re-gassed, $70 a pair
- Seats and trims interior - retrimmed front and back seats in grey vinyl with darker grey pattern cloth centres in very good conditon, no rips or tears. Rest if interior in grey. Cost me over $1,000 just to retrim. Selling the lot for $400.
Interior Pics:
http://members.optusnet.com.au/~charlies/mypic4.JPG
http://members.optusnet.com.au/~charlies/mypic5.JPG
- Simmons V4 16 x 8 and 9 with 215 and 245 Falken tyres - $1100
Simmons Pics:
http://members.optusnet.com.au/~charlies/mypic1.JPG
http://members.optusnet.com.au/~charlies/mypic3.JPG
- Simmons B45 polished 15 x 4 and 8's with rubber SOLD
- TO4 turbo with 60mm comp wheel, O-trim turbine woth .70 a/r (reco'd about 1000km's ago) with s/s oil feed line and modified return pipe, plus s/s intake piping and filter
- 38mm turbonetics deltagate external wastegate
- modified and ported stock exhaust manifold
-All three - $1700 (will not seperate) - SOLD
- bottom end SOLD
- L300 port matched -$250 - SOLD
- RX7 S4 550cc injectors -$250 - SOLD
- Head, reco and ported 5000K's old cost $1000, sell $700 - SOLD
All three for $1100
- Microtech Digi 1 PRO fuel and ignition ECU with loom tuned to suit above. $450 or $1500 with intake/injectors/head - SOLD
Heavy duty clutch kit with solid centre clutch plate done 5,000kms. Cost $700, asking $300.
- Custom polished s/s intercooler piping with blue silicon hoses (Piping, polishing and hoses cost me over $900 alone, custom PWR cooler RRP $1200).
- $300 for the piping and silicon hoses,
- $400 for damaged intercooler (doesn't leak but requires repair - about $150-200) - SOLD
- custom s/s exhaust manifold to suit to4 (not fitted) SOLD
- 2.4L 4G64B block+crank - SOLD
- Stock VR4 exhaust manifold $50
some more pics can be seen here:
http://www.angelfire.com/emo2/sydneysta ... XTIME.html
CAR SOLD
parts still left:
- one standard 3.55 open JA diff $100
- gearboxes: two left $200 each
- rear hatches $100
- hatch struts, re-gassed, $70 a pair
- Seats and trims interior - retrimmed front and back seats in grey vinyl with darker grey pattern cloth centres in very good conditon, no rips or tears. Rest if interior in grey. Cost me over $1,000 just to retrim. Selling the lot for $400.
Interior Pics:
http://members.optusnet.com.au/~charlies/mypic4.JPG
http://members.optusnet.com.au/~charlies/mypic5.JPG
- Simmons V4 16 x 8 and 9 with 215 and 245 Falken tyres - $1100
Simmons Pics:
http://members.optusnet.com.au/~charlies/mypic1.JPG
http://members.optusnet.com.au/~charlies/mypic3.JPG
- Simmons B45 polished 15 x 4 and 8's with rubber SOLD
- TO4 turbo with 60mm comp wheel, O-trim turbine woth .70 a/r (reco'd about 1000km's ago) with s/s oil feed line and modified return pipe, plus s/s intake piping and filter
- 38mm turbonetics deltagate external wastegate
- modified and ported stock exhaust manifold
-All three - $1700 (will not seperate) - SOLD
- bottom end SOLD
- L300 port matched -$250 - SOLD
- RX7 S4 550cc injectors -$250 - SOLD
- Head, reco and ported 5000K's old cost $1000, sell $700 - SOLD
All three for $1100
- Microtech Digi 1 PRO fuel and ignition ECU with loom tuned to suit above. $450 or $1500 with intake/injectors/head - SOLD
Heavy duty clutch kit with solid centre clutch plate done 5,000kms. Cost $700, asking $300.
- Custom polished s/s intercooler piping with blue silicon hoses (Piping, polishing and hoses cost me over $900 alone, custom PWR cooler RRP $1200).
- $300 for the piping and silicon hoses,
- $400 for damaged intercooler (doesn't leak but requires repair - about $150-200) - SOLD
- custom s/s exhaust manifold to suit to4 (not fitted) SOLD
- 2.4L 4G64B block+crank - SOLD
- Stock VR4 exhaust manifold $50
some more pics can be seen here:
http://www.angelfire.com/emo2/sydneysta ... XTIME.html
Last edited by NXTIME on Tue Sep 14, 2010 2:54 pm, edited 38 times in total.
Please register your vehicle details on the AUSTRALIAN STARION REGISTRY <HERE>
1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
Plenty of interest, but not many buyers.
Engine just needs a cam and tune and it will make some big numbers.
Test drive in car. :D
TTT
Engine just needs a cam and tune and it will make some big numbers.
Test drive in car. :D
TTT
Please register your vehicle details on the AUSTRALIAN STARION REGISTRY <HERE>
1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
front bits?
mate - im looking at buying an 82 ja. it drives, but has hit a stop sign. its f....ed the front bar, & apron behind it. the drivers headlight & assy are stuffed too. also need a dash shroud & a windscreen.do u have these bits & if so - how much? oh he wants $1k for it- the bodys good, silver, has electric leather recaros (scabby looking). 2 new tyres, hotwires (yuk!), out of rego but has been started weekly. it has 270k on it , turbos been rebuilt & motors ok. reckon this sounds alright 4 the money?
- Sargeant_Khan
- Enthusiast
- Posts: 673
- Joined: Thu Dec 16, 2004 9:31 pm
- Location: Ipswich
-
- [P] Plater austaz
- Posts: 25
- Joined: Tue Jun 29, 2004 2:33 pm
Who is online
Users browsing this forum: No registered users and 10 guests