GB - Slotted/Cross Drilled ROTORS ** CLOSED **

Website · Post by **WidebodyWoody** » Thu Feb 23, 2012 3:49 am

So removing the brake dust shields helps keep the pads cool I take it?

4g6beat · Post by **4g6beat** » Sat Feb 25, 2012 8:55 am

count me in for slotted disk rear 5 studs, thanks pete! :D

Website · Post by **WidebodyWoody** » Sun Feb 26, 2012 12:07 am

hey mate, sorry but was talking with my mate who is doing the mods for me, and we have decided to not do this, but do a full conversion of the brake system after we get the motor going. Cheers.

JJH · Post by **JJH** » Tue Feb 28, 2012 8:05 am

If this happens, I'm just in for fronts now; just bought rears from Mick :D

Post by **TOMSUN** » Tue Feb 28, 2012 12:17 pm

First post updated.

Still pushing on with this..

Post by **TOMSUN** » Wed Feb 29, 2012 7:20 pm

Guys, please confirm if your in or out and if you want front, back or both. Also pick slotted, cross-drilled or slotted and cross-drilled.

Have spoken to Aaron and he said that we can use the VPW container that comes out of California to save some money on shipping costs. :beer Thanks mate!!!
If you haven't already done it, check out some of their stuff they sell... http://www.vpw.com.au/

HURRY, AS I DON'T PLAN ON DOING ANOTHER GB FOR ROTORS SO GET IN ON IT AND SAVE SOME CASH!!!

:beer

jk · Post by jk » Thu Mar 01, 2012 1:55 pm

Mate, I confirm rear only, 5 stud with slots only.
Thanks for all your efforts so far too.

NXTIME · Post by **NXTIME** » Thu Mar 01, 2012 4:12 pm

Unfortunately, I am out.

Post by **TOMSUN** » Thu Mar 01, 2012 11:03 pm

Thanks guys... First post updated.

JJH · Post by **JJH** » Sun Mar 04, 2012 1:16 pm

Measured my rotors today and found I've still got 2.5mm before they're unroadworthy, so I'm out.
Thanks for finding these Pete.

Post by **TOMSUN** » Sun Mar 04, 2012 4:16 pm

JJH wrote:Measured my rotors today and found I've still got 2.5mm before they're unroadworthy, so I'm out.
Thanks for finding these Pete.

No prob.
First post updated

1320ft · Post by **1320ft** » Sun Mar 04, 2012 5:58 pm

Pete, make mine drilled & slotted. (weight reduction)

Post by **TOMSUN** » Sun Mar 04, 2012 7:13 pm

1320ft wrote:Pete, make mine drilled & slotted. (weight reduction)

First post updated

Post by **TOMSUN** » Sat Mar 10, 2012 10:35 am

Bump. First post updated.

dirtygalant
burzman
4g6beat

please check your PM's

4g6beat · Post by **4g6beat** » Tue Mar 13, 2012 4:29 pm

Hi Tried confirming via private message but got errors so i'm confirming in here, 5 stud rears slotted, let me know when you need the $$ and i'll put it through.

thanks Pete! :beer

Austarion

GB - Slotted/Cross Drilled ROTORS CLOSED

Who is online