WTB: the impossible: Good JB door trims

Got something to sell? Looking for a rare Starion part? Got something bust that needs replacing? then this is your place!
MitsuMadness
I love starions
Posts: 481
Joined: Fri Mar 19, 2004 3:50 pm
Location: Melbourne

Post by MitsuMadness »

paradox wrote:just thinking theres something i know that may be able to get the stain out, if you can get your hands on "AutoSmart - Brisk" good stuff for the vinal and the only thing i've tried that removes that stuff without dammaging the material.
Sounds good! Although in this case I think it may have fully damaged the armrest already. It looks like the metal is kind of 'melted' into the armrest, and even when I tried to clean it with some cleaning products it didn't want to budge, and looked more like it would take the plastic surface off with it before it came off. But - I haven't tried that particular product so you never know, it may do the trick.

Also noticed that the drivers door trim is actually a little more tatty than the passenger side (still fair condition though), but I just can't open the door to confirm or get a better photo cos I can't move the car away from the one next to it for a few weeks.
Just want to make sure that you do get something that is up to par, and that the drivers door won't let you down, especially if you're having to pay postage interstate for it as well.

So yeh, over to NachoMan might be a better option, if you're willing to post them to him NachoMan.

:beer
<--== When I die, I want to be buried sideways ==-->

1988 GSR-VR Widebody 2.6L
1984 Starion JA (stripped down for track)
1983 Starion JAs x2 and shed of Starion, VR4 and EVO bits for various track projects
robert26t
Enthusiast
Posts: 529
Joined: Tue May 04, 2004 11:01 am
Location: penrith, nsw

Post by robert26t »

Thanks again.

See how it pans out. I dont mind waiting a few weeks until you pull the car out. Real shame about those cage marks though!

Cheers
enthuzed
Austarion Occupant
Posts: 3578
Joined: Tue Apr 06, 2004 1:21 pm
Location: Melborno
Contact:

Re: ...

Post by enthuzed »

NachoMan wrote:Otherwise, I have several sets of burgundy door trims.
NachoMan, what condition & what sort of price for the drivers side lower plus an extra speaker grill?
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
MitsuMadness
I love starions
Posts: 481
Joined: Fri Mar 19, 2004 3:50 pm
Location: Melbourne

Post by MitsuMadness »

Hi robert26t!

Just an update on this, I finally pulled the car out and can open the drivers side door, and yeh unfortunately lower down it's pretty tatty, not just the armrest. I guess the drivers door gets more use than the passenger side.

Not sure if you're still interested in these?

Cheers!
<--== When I die, I want to be buried sideways ==-->

1988 GSR-VR Widebody 2.6L
1984 Starion JA (stripped down for track)
1983 Starion JAs x2 and shed of Starion, VR4 and EVO bits for various track projects
robert26t
Enthusiast
Posts: 529
Joined: Tue May 04, 2004 11:01 am
Location: penrith, nsw

Post by robert26t »

MitsuMadness wrote:Hi robert26t!

Just an update on this, I finally pulled the car out and can open the drivers side door, and yeh unfortunately lower down it's pretty tatty, not just the armrest. I guess the drivers door gets more use than the passenger side.

Not sure if you're still interested in these?

Cheers!
Thanks for doing that mate.

I guess its not much point in me getting them if they are no better then what I have. Thanks again for your offer though

Cheers!,
Rob.
MitsuMadness
I love starions
Posts: 481
Joined: Fri Mar 19, 2004 3:50 pm
Location: Melbourne

Post by MitsuMadness »

No prob at all :)
Yeh I was pulling it out yesterday anyway so was the perfect time to look.

Cheers
<--== When I die, I want to be buried sideways ==-->

1988 GSR-VR Widebody 2.6L
1984 Starion JA (stripped down for track)
1983 Starion JAs x2 and shed of Starion, VR4 and EVO bits for various track projects
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

I need to get a good drivers side upper in burgundy if anyone has one
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
NachoMan
nearly postwhore
Posts: 1589
Joined: Sat Jan 10, 2004 12:28 pm
Location: Perth (Morley), WA
Contact:

...

Post by NachoMan »

PM me if you want burgundy stuff...
Post Reply

Who is online

Users browsing this forum: No registered users and 65 guests