KM132 5-speed Strengthening Pans

plh · Post by **plh** » Sun May 23, 2010 11:17 pm

Time to upgrade?

We have a steady supply of Strengthening Pans available. Made in thicknesses of 19mm for USD $109.95 or 12mm for USD $94.95. Includes mounting hardware, Loctite etc. Even added some bling.

Website created for easier ordering. Paypal Cart etc...

Shipping to Australia USD $45.00 for 1 to 3 kits. 10 day delivery. I've sent several to Oz.

Get the info here: www.tuffpans.com

MainstreaM · Post by **MainstreaM** » Mon May 24, 2010 1:23 am

Good guy with a nice product. Has sold plenty on www.projectzerog.com, www.4x4wire.com, and www.Starquestclub.com. This is just as good or better than the "waffle" pan found on the 88-89 transmissions.

Kane

OLD FART · Post by **OLD FART** » Mon May 24, 2010 5:21 am

Hi Paul good to see you here The tuff pan you sent me has come thru the dyno tuneing and hard launches at the Gatton sprints with flying colours.It was a perfect fit and fast shipping :beer
Rad

plh · Post by **plh** » Tue Jul 06, 2010 10:00 pm

bump up to the top. I still have these available. Thanks for the support!

plh · Post by **plh** » Sun Jan 09, 2011 4:04 am

Price drop on the 12mm (1/2") TuffPan Pro Kit. Now $89.95. Order at Tuff Pans
http://www.tuffpans.com

avandull · Post by **avandull** » Sun Jan 09, 2011 6:43 am

Im looking forward to mine arriving. Oldie has had a good run out of his.
An excellent alternative to putting in a different gearbox.

OLD FART · Post by **OLD FART** » Sun Jan 09, 2011 10:45 am

Hey Paul thats 4 sales now so when will I see my commission chq?? :) LOL

RiceThief · Post by **RiceThief** » Sun Jan 09, 2011 4:59 pm

Rad what size pan are you using for your car?

OLD FART · Post by **OLD FART** » Sun Jan 09, 2011 5:16 pm

RiceThief wrote:Rad what size pan are you using for your car?

The thickest/strongest one :D

plh · Post by **plh** » Mon Jan 10, 2011 12:27 am

OLD FART wrote:Hey Paul thats 4 sales now so when will I see my commission chq?? :) LOL

There is a possibility that I'll get to Port Melborne in the next couple years (GM Holden) so maybe I'll make a trip up to Brisbane and share some beers!

Thanks for the comps by the way, always appreciated :beer

enthuzed · Post by **enthuzed** » Fri Feb 18, 2011 7:06 am

What sort of material is used for these? Is the 19mm one much better than the 12? You'd have to be careful over speed humps with the big one...

plh · Post by **plh** » Tue Apr 26, 2011 12:16 pm

enthuzed wrote:What sort of material is used for these? Is the 19mm one much better than the 12? You'd have to be careful over speed humps with the big one...

6061-6 Aluminum. I received a replenishment from my machinist this past weekend, Anybody need a "TuffPan"?

muttis3lv6 · Post by **muttis3lv6** » Thu Apr 28, 2011 9:36 am

Errrr
Where does this go and what does it do??

OLD FART · Post by **OLD FART** » Thu Apr 28, 2011 10:47 am

Rhys you remove the existing sump/cover plate on the bottom of the box and install the TUFF PAN .It is designed to eliminate/reduce distorsion of the box which stops the gears from not meshing properly that can lead to breakages behind hi power motors FWIW I have a 20mm thick one on my car and have done 4 street sprints to date with no problems so one would it would be good insurance to have one fitted

plh · Post by **plh** » Sun May 22, 2011 1:32 am

OLD FART wrote:Rhys you remove the existing sump/cover plate on the bottom of the box and install the TUFF PAN .It is designed to eliminate/reduce distorsion of the box which stops the gears from not meshing properly that can lead to breakages behind hi power motors FWIW I have a 20mm thick one on my car and have done 4 street sprints to date with no problems so one would it would be good insurance to have one fitted

I have another new shipment from my machinist available. Thanks for the support!

Austarion

KM132 5-speed Strengthening Pans

KM132 5-speed Strengthening Pans

Who is online