The manifold has been modified to accept a XF throttle body by filling in the void at the top with alloy and reboring the hole to suit the 68mm throttle body size. Also there is a few tapped holes for water sensors and fittings and there is also a hole on the side for an air temp sensor. The manifold was bead blasted by the previous owner and haven't cleaned it since coming off the car. It could do with a little degrease internally but apart from that it's fine.
This manifold is perfect if you already have the intercooler piping to suit the standard inlet and want to go to multipoint easily.
I can be contacted via PM or on my mobile Steve: 0407 597 019
Located at Strathpine which is about 40 min North from Brisbane
$160
Willing to post at Buyers expense
Showing the xf throttlebody bolted to the manifold and the two l300 throttle bodys. Note the idle motor was broken off and missing before i got it.
