EOI: [VIC] mpi setup, turbo, exh manifold

[oggy]

g'day all
im thinking about wrecking the cordia. see here http://www.cordiapower.com/forum/viewto ... 88#p149588
this is still an eoi at this point, but if i get interest on this stuff on here then it will go ahead.

so thought i might put a few things on here if you guys are interested in...


complete MPI setup: $1,000 sonata inlet manifold (will need to be modded to suit rwd). 800cc injectors, either malpassi or sard FPR (i always forget which one lol), microtech lt-10s, x4 ignitor, 4 bosch ignition coils, optical dizzy, 044 fuel pump and butchered loom to suit cordia. also have an XF throttle body that i never put on that can go with.

DASH split pulse exh manifold $250 FWD dash manifold, MINT condition. only bought it a few months ago.

highflow tc06 $600 FWD turbo, so not sure how this works for you guys, but anyway..... rebuilt around 25,000kms ago. ported housings, clipped tc06 exh wheel, t4 comp wheel - 50mm inducer 70mm exducer - roughly same size as 18g wheel and about as big as you can go without changing comp housings or welding new inlet snout on!
ported wastegate port and bigger flapper (boost creep solved :P ) silicon hose has to be slipped over outlet, as crossover pipe mount has been ground off.
will include gt pumps oil feed and drain kits (you guys should be able to use the braided feed) and all water lines.

SOHC head $500 rebuild about 25,000kms ago by flav. ported, had some combustion chamber smoothing. double valve springs, adjustable cam gear, RPW billet roller cam and hydraulic roller rockers. cam is $800 to buy from RPW alone. comes with a sexy metalic blue cordia rocker cover LOL

if the wrecking goes ahead, the car will be located in colac, VIC. but most parts i can take with me after being removed from the car. i live in bendigo, and go to melb for 1 week every month. so pickup in either colac, bendigo, or heidelberg area of melb. whichever is easiest.

if your interested reply here, or PM me here.

ohh, and there is an old engine bay pic in the cordiapower thread. if people are interested i can get closer pics of required parts.

cheers
josh :beer