WTB WIDEBODY STARION

Got something to sell? Looking for a rare Starion part? Got something bust that needs replacing? then this is your place!
pakistarionjd
[P] Plater austaz
Posts: 23
Joined: Sun Oct 12, 2008 4:06 pm
Location: Sydney

WTB WIDEBODY STARION

Post by pakistarionjd »

just after a wide body starion if any1 wants to sell or knows any1 selling would be good, or just mite have to import 1 :D
JDSTAZ45
almost postwhore
Posts: 1250
Joined: Sat Feb 12, 2005 10:00 pm
Location: Inner West, Sydney

Post by JDSTAZ45 »

I hope you have done some research on the cost of bringing one in. No change from $12K these days from Japan.

The other option is, buy one from the US for around half the price and convert over to RHD. It will probably end up costing you more...

Or if you have friends in the panel beating business, buy a run down one from the US with little rust and convert
your own JD into a widey! The rear quarter panels would be trickiest....

I believe your JD is silver. Silver widey....very nice! :drool:
Imports.
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
pakistarionjd
[P] Plater austaz
Posts: 23
Joined: Sun Oct 12, 2008 4:06 pm
Location: Sydney

Post by pakistarionjd »

yea that sound like an idea , but if i get it wrong will end up with 2 bad starions , so will just have 2 do my home work and keep looking :o , never no 1 mite turn up on here 4 sale
docile
Big Dorifto
Posts: 74
Joined: Thu Jan 22, 2009 11:58 am
Location: Going round in circles!!

Post by docile »

pakistarionjd
[P] Plater austaz
Posts: 23
Joined: Sun Oct 12, 2008 4:06 pm
Location: Sydney

Post by pakistarionjd »

thats a nice car but want a standard one
docile
Big Dorifto
Posts: 74
Joined: Thu Jan 22, 2009 11:58 am
Location: Going round in circles!!

Post by docile »

pakistarionjd wrote:thats a nice car but want a standard one
You mean that's a nice car but you can't afford it. :wink:

Feel free to prove me wrong 'cause by the sounds of it your just another time waster and dreamer hoping for a bargain... rofl
pakistarionjd
[P] Plater austaz
Posts: 23
Joined: Sun Oct 12, 2008 4:06 pm
Location: Sydney

Post by pakistarionjd »

dear docile i think you must be some big top shot in your own small mind good luck if you are , but i dont think i need to prove it to you , but if you still want to see by all means comes over and you can see for urself if i can affored it or not , so dont be a hero thanks
User avatar
NXTIME
Registry Nazi
Posts: 2972
Joined: Thu Jan 08, 2004 3:14 pm
Location: Sydney, NSW

Post by NXTIME »

pakistarionjd wrote:yea that sound like an idea , but if i get it wrong will end up with 2 bad starions , so will just have 2 do my home work and keep looking :o , never no 1 mite turn up on here 4 sale
If you spent a couple of minutes searching this forum you would have found two widebodies (both in Sydney) for sale.

If you are serious PM me.
Please register your vehicle details on the AUSTRALIAN STARION REGISTRY <HERE>


1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
JDSTAZ45
almost postwhore
Posts: 1250
Joined: Sat Feb 12, 2005 10:00 pm
Location: Inner West, Sydney

Post by JDSTAZ45 »

I sent you a PM on Sunday with information, but you haven't opened it!
Imports.
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
JDSTAZ45
almost postwhore
Posts: 1250
Joined: Sat Feb 12, 2005 10:00 pm
Location: Inner West, Sydney

Post by JDSTAZ45 »

J-spec have a good example for sale atm......
http://www.j-spec.com.au/list/index.php?ID=14466

Proof they are not getting cheaper!
Imports.
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
User avatar
Vulpes
almost postwhore
Posts: 1281
Joined: Mon Oct 27, 2008 7:13 pm
Location: Sydney

Post by Vulpes »

JDSTAZ45 wrote:J-spec have a good example for sale atm......
http://www.j-spec.com.au/list/index.php?ID=14466

Proof they are not getting cheaper!
Mal for 19K I'd want a starion that at least had a gearstick boot and not a worn steering wheel, if these are just two items you can see from the pics I can only imagine what else lies beneath. Not to mention the fact that you are spending $19k to buy a starion with a crappy old sigma motor in it. Never understood why the yanks didnt get the more modern, smaller, lighter quieter sirius engine rather than the astron ? I reckon youd be spending another 5 to 10k to bring it up to immaculate.
JD_Stazza_Brendan
almost postwhore
Posts: 1131
Joined: Tue Jan 25, 2005 10:46 pm
Location: Mackay, QLD, Australia

Post by JD_Stazza_Brendan »

Someone want to donate me 20grand? :D
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.

Yes i have too many toys.
SOHC POWER
JD_Stazza_Brendan
almost postwhore
Posts: 1131
Joined: Tue Jan 25, 2005 10:46 pm
Location: Mackay, QLD, Australia

Post by JD_Stazza_Brendan »

Vulpes wrote:
JDSTAZ45 wrote:J-spec have a good example for sale atm......
http://www.j-spec.com.au/list/index.php?ID=14466

Proof they are not getting cheaper!
Mal for 19K I'd want a starion that at least had a gearstick boot and not a worn steering wheel, if these are just two items you can see from the pics I can only imagine what else lies beneath. Not to mention the fact that you are spending $19k to buy a starion with a crappy old sigma motor in it. Never understood why the yanks didnt get the more modern, smaller, lighter quieter sirius engine rather than the astron ? I reckon youd be spending another 5 to 10k to bring it up to immaculate.
Yanks like torqey motors, something the 2.6 is good for. And wasnt the 2.6 brought in to meet new emmisions in other countrys like UK and Japan.
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.

Yes i have too many toys.
SOHC POWER
NachoMan
nearly postwhore
Posts: 1589
Joined: Sat Jan 10, 2004 12:28 pm
Location: Perth (Morley), WA
Contact:

...

Post by NachoMan »

$19,000!
LOL
rofl
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

that's a cool looking strut brace though
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest