Doesn't bolt to the starion gearbox. Needs to be wideblock.
I think he means with the dellow housing.
To be honest as i stated before, i would go rvr motor now (so the cas is at the front) and run a dellow supra box conversion. RVR's are just a detuned evo 3 motor, you just need cams and a turbo and your up to evo 3 spec. For $1500 you can have a rvr motor including the ecu, that can be chipped just like a evo. I have seen a few gsr converted lancers running 20psi through them with no probs. As for crankwalk, i really doubt a auto rvr motor will have it. In what i have seen the ones that have crankwalk, all have, had serious clutches behind them and have been subjected to hi rpm launches.
just be aware the rvr motor with the front mounted cas is pretty hard to find, only a certain model, so i've been told by an importer...
I think he is pulling your chain, I have never seen one without it. You can tell by the top timing cover, as it has a small hole with a plug coming out of it.
just be aware the rvr motor with the front mounted cas is pretty hard to find, only a certain model, so i've been told by an importer...
I think he is pulling your chain, I have never seen one without it. You can tell by the top timing cover, as it has a small hole with a plug coming out of it.
i've seen one there, that was an rvr motor with front mounted cas, he has had other dohc turbo motors there that were supposedly out of an rvr aswell that didnt have the front mounted cas.. dont know what the deal is!
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
