Outcast Horizon Parts GP
Outcast Horizon Parts GP
Hey Guys. some of you may know know me from the StarquestClub site. Im running a GP of the radio kits and air diversion panels I make for the Starions. heres all the info for it:
Looking to see if people are interested in a GP for the Radio Kits and Air Diversion Pannels I make. Ive also been working on a double din kit and a radio deletion kit.
This is going to end on January 30, 2009
Air Diversion Pannel
10 = $55.00
20 = $47.50
30 = $45.00
Radio Kit; No Gauge Holes
10 = $28.50
20 = $21.00
30 = $18.50
Radio Kit; 3 Gauge Holes (Bellow Radio)
10 = $29.50
20 = $22.00
30 = $19.50
Radio Kit; 3 Gauge Holes (Above Radio)
10 = $29.50
20 = $22.00
30 = $19.50
Radio Kit; Double Din
10 = $28.50
20 = $21.00
30 = $18.50
Powder Coating for Radio kits$5
Gloss Red
Gloss Orange
Gloss Yellow
Gloss Green
Gloss Blue
Gloss Black
Grey
Gunmetal (lots of different coloered metalics in this)
Screamin Eagle (textured Black, kinda Semi gloss, very nice finish)
Flat Black
Shipping is an extra $20 since Im in the states :( . There is also the option of having me powder coat the radio kits for an extra $5. The Double Din kit is just a trim peice. It is not ment to hold the radio. Most Double Din decks are bolted in which means you guys would have to drill your side brakets to mount the deck.
Im going to post this up on the other sites to try and get as many people going as posible to get everyone the best price.
Radio Kit; No Holes:
1. dmyers151 (SQC) PAID
2. Dart67 (SQC) PAID
3. lamlew (SQC)
4. dirty sanchez (AUS) PAID
5.
6.
7.
8.
9.
10.
Radio Kit; 3 holes Below Deck:
1. lepore (SQC)
2. mdbgracing + powder coating (SQC) PAID
3. Greg + powder coating (SQC)
4. helrar70 (SQC)
5. SpoolinTurbo (SQC)
6. CaliconquestAlex (SQC) PAID
7. newquest86 (SQC) PAID
8. jody1 + powder coating (SQC)
9. Jcizzle61 + Powder Coating (SQC) PAID
10. Slydogg (SQC) PAID
Radio Kit; 3 hole above deck:
1. PSU_Crash (SQC) PAID
2. Ono (SQC) PAID
3. Mix_67 (SQC)
4. slowspyder (SQC)
5. JD_Stazza_Brendan + Powder Coating (AUS) PAID
6. BMWTech + Powder Coating(SQC)PAID
7. BMWTech (SQC)PAID
8. toofast + Powder Coating (SQC)
9. dirty sanchez (AUS) + Powder Coating PAID
10. Hernz + Powder Coating (SQC) PAID
11. MC23 PAID
Not Sure:
87QuestKS (SQC)
Air Diversion Pannel:
1. CaliConquestAlex (SQC) PAID
2. Dstar88 (SQC)
3. Dart67 (SQC) PAID
4. JD_Stazza_Brendan (AUS) PAID
5. MR Bender(AUS)PAID
6. iGSR_VR (G54B)
7. iGSR_VR (G54B)
8. jody1 (SQC)
9. newquest86 (SQC) PAID
10. dmyers151 (SQC) PAID
11. BMWTech (SQC)PAID
12. dirty sanchez (AUS) PAID
13. slydogg (SQC) PAID
Radio Harness $10
1. lamlew (AUS)
2. spoolinturbo
3. jody1 (SQC)
4. psucrash (SQC) PAID
http://outcasthorizon.com/starquest/sqcgp.html
Looking to see if people are interested in a GP for the Radio Kits and Air Diversion Pannels I make. Ive also been working on a double din kit and a radio deletion kit.
This is going to end on January 30, 2009
Air Diversion Pannel
10 = $55.00
20 = $47.50
30 = $45.00
Radio Kit; No Gauge Holes
10 = $28.50
20 = $21.00
30 = $18.50
Radio Kit; 3 Gauge Holes (Bellow Radio)
10 = $29.50
20 = $22.00
30 = $19.50
Radio Kit; 3 Gauge Holes (Above Radio)
10 = $29.50
20 = $22.00
30 = $19.50
Radio Kit; Double Din
10 = $28.50
20 = $21.00
30 = $18.50
Powder Coating for Radio kits$5
Gloss Red
Gloss Orange
Gloss Yellow
Gloss Green
Gloss Blue
Gloss Black
Grey
Gunmetal (lots of different coloered metalics in this)
Screamin Eagle (textured Black, kinda Semi gloss, very nice finish)
Flat Black
Shipping is an extra $20 since Im in the states :( . There is also the option of having me powder coat the radio kits for an extra $5. The Double Din kit is just a trim peice. It is not ment to hold the radio. Most Double Din decks are bolted in which means you guys would have to drill your side brakets to mount the deck.
Im going to post this up on the other sites to try and get as many people going as posible to get everyone the best price.
Radio Kit; No Holes:
1. dmyers151 (SQC) PAID
2. Dart67 (SQC) PAID
3. lamlew (SQC)
4. dirty sanchez (AUS) PAID
5.
6.
7.
8.
9.
10.
Radio Kit; 3 holes Below Deck:
1. lepore (SQC)
2. mdbgracing + powder coating (SQC) PAID
3. Greg + powder coating (SQC)
4. helrar70 (SQC)
5. SpoolinTurbo (SQC)
6. CaliconquestAlex (SQC) PAID
7. newquest86 (SQC) PAID
8. jody1 + powder coating (SQC)
9. Jcizzle61 + Powder Coating (SQC) PAID
10. Slydogg (SQC) PAID
Radio Kit; 3 hole above deck:
1. PSU_Crash (SQC) PAID
2. Ono (SQC) PAID
3. Mix_67 (SQC)
4. slowspyder (SQC)
5. JD_Stazza_Brendan + Powder Coating (AUS) PAID
6. BMWTech + Powder Coating(SQC)PAID
7. BMWTech (SQC)PAID
8. toofast + Powder Coating (SQC)
9. dirty sanchez (AUS) + Powder Coating PAID
10. Hernz + Powder Coating (SQC) PAID
11. MC23 PAID
Not Sure:
87QuestKS (SQC)
Air Diversion Pannel:
1. CaliConquestAlex (SQC) PAID
2. Dstar88 (SQC)
3. Dart67 (SQC) PAID
4. JD_Stazza_Brendan (AUS) PAID
5. MR Bender(AUS)PAID
6. iGSR_VR (G54B)
7. iGSR_VR (G54B)
8. jody1 (SQC)
9. newquest86 (SQC) PAID
10. dmyers151 (SQC) PAID
11. BMWTech (SQC)PAID
12. dirty sanchez (AUS) PAID
13. slydogg (SQC) PAID
Radio Harness $10
1. lamlew (AUS)
2. spoolinturbo
3. jody1 (SQC)
4. psucrash (SQC) PAID
http://outcasthorizon.com/starquest/sqcgp.html
Last edited by Outcast01 on Tue Feb 24, 2009 7:31 am, edited 15 times in total.
-
- almost postwhore
- Posts: 1131
- Joined: Tue Jan 25, 2005 10:46 pm
- Location: Mackay, QLD, Australia
Im interested in the Air Diversion panel and Radio Kit. Have you gotten any shipping quotes done to Australia? thats my main concern. Thanks.
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
-
- almost postwhore
- Posts: 1131
- Joined: Tue Jan 25, 2005 10:46 pm
- Location: Mackay, QLD, Australia
So I want an
Air diverson panel = $55 (at the moment)
Radio kit, 3 gauge above radio = $29.50 (at the moment)
It would be
55.00
+29.50
+20 shipping
=104.50 USD
Correct? if so put me down for those peices , thanks
Air diverson panel = $55 (at the moment)
Radio kit, 3 gauge above radio = $29.50 (at the moment)
It would be
55.00
+29.50
+20 shipping
=104.50 USD
Correct? if so put me down for those peices , thanks
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
I'm up for a radio kit with no gauge holes.. I would be putting switches there..
what's the radio harness for $10?
what's the radio harness for $10?
quest wrote:don't try explaining that to her tho..... just leave. lolWANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
If your factory radio plug hasnt been cut out it lets you install the new deck with out hacking the harness. some people like to keep the new aftermarket deck they put into cars and reinstall the factory if/when they sell the car so this gives you that option.thrash wrote:I'm up for a radio kit with no gauge holes.. I would be putting switches there..
what's the radio harness for $10?
Ok guys, link is up for the payments page. Let me know if there is anything else you need.
http://outcasthorizon.com/starquest/sqcgp.html
http://outcasthorizon.com/starquest/sqcgp.html
- MR Bender
- Enthusiast king
- Posts: 754
- Joined: Sun Nov 11, 2007 8:01 pm
- Location: Perth Western Australia (SOR)
um i dont have paypal can anyone help me pay for it
as in if you have paypal can i sent you the money by netbank and then you pay for the thing i want? any takers?? can anyone help me??
as in if you have paypal can i sent you the money by netbank and then you pay for the thing i want? any takers?? can anyone help me??
Bite my shiny metal ass!!!
Russell Coight: Some of the animals are nocturnal, so the best time to see them is at night. Only you can't see them, because it's dark.
Russell Coight: Some of the animals are nocturnal, so the best time to see them is at night. Only you can't see them, because it's dark.
Who is online
Users browsing this forum: No registered users and 7 guests