I am selling because I have lost interest, also tend to travel a lot for work. I use the car as a daily driver and want something bigger and more comfortable. I am asking $6000 ono. Rego expires Feb 2009. I have got the receipts for all the work done.
Engine (All engine mods below done professionally during rebuild by West Racing completed March 2006)
Currently running 14lb boost max, 94HP at the rear wheels. Complete rebuild costing more than $13,000. Needs intercooler then more boost!
The compression has been raised significantly, so it drives very well at low revs with lots of boost down low (quite different to a stock starion). It also handles very well with the upgraded suspension but still comfortable.
Internals
Custom forged pistons and rings
Raised Compression to 8.7:1
Head studs
Redline oil
Externals
Turbo: Water cooled Garrett GT2860RLS Ball Bearing, custom mountings and cross over pipe.
Intake Manifold: Mitsubishi L300 EFI
MPI Conversion- low impedance injectors
GFB Blow Off Valve
Ignition: Bosch
Pod air filter
Reconditioned radiator
Drivetrain
Heavy Duty Clutch (April 2005)
Redline diff oil
Redline gearbox oil
Brakes recently serviced (June 2007)
235 wheels/tyres
Engine Management
MoTeC M4
Exhaust (May 2004)
Custom Dump pipe
2 ½ inch piping from turbo back
Straight through muffler
Sound System
Deck: Alpine CD
Amplifier: Audioline
Speakers Front: Alpine 2 way
Speakers Rear: Alpine
Security (Dec 2006)
Cat 4 alarm
ultrasonic sensors
2dr central locking
Suspension (Wheels World Oct 2007)
Lowered King springs
Koni Adjustable shocks with custom mounts
Uprated sway bars front and rear
Photos of the engine rebuild 2006
Starion JA for sale
- Starion_Turbo
- Enthusiast king
- Posts: 898
- Joined: Wed Dec 08, 2004 5:32 pm
- Location: South Australia
- Contact:
Re: Starion JA for sale
Sounds wrongRyan wrote: 94HP at the rear wheels.
Powerplant: Chipped stock ECU, 2044cc, 8.5:1, head intake enlarged and polished, exhaust manifold enlarged,
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
Re: Starion JA for sale
I think that trere is a 1 missing somewhere :roll:Starion_Turbo wrote:Sounds wrongRyan wrote: 94HP at the rear wheels.
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
-
- almost postwhore
- Posts: 1131
- Joined: Tue Jan 25, 2005 10:46 pm
- Location: Mackay, QLD, Australia
There has to be a 1 missing from there. Ive got MPI, no-cooler on 8psi and i have 145hp with stock bottom end.
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
-
- nearly postwhore
- Posts: 1589
- Joined: Sat Jan 10, 2004 12:28 pm
- Location: Perth (Morley), WA
- Contact:
Agreed!Noddy wrote:Hey Ryan
Come along to the next meet 25th May............. :)
see the post in cruises.... pm Nachoman for details :beer
Come along to the next meet, and maybe some interest will be renewed.
Other than that, a meet/cruise is a great way to meet new contacts for selling your car...
- Starion_Turbo
- Enthusiast king
- Posts: 898
- Joined: Wed Dec 08, 2004 5:32 pm
- Location: South Australia
- Contact:
Who is online
Users browsing this forum: No registered users and 18 guests