$600 JB in perth!!!!!!!!

Got something to sell? Looking for a rare Starion part? Got something bust that needs replacing? then this is your place!
NachoMan
nearly postwhore
Posts: 1589
Joined: Sat Jan 10, 2004 12:28 pm
Location: Perth (Morley), WA
Contact:

...

Post by NachoMan »

The problem isn't whether it's saveable or not. The problem is that WA has such a small market for Starions. So if you were to buy it and fix it up, and then subsequently sell it, selling it to someone in WA would take a while. The alternative is to of course sell it to someone over in the east, but there seems to be MANY more Starions there, than there are here. Just look at the member list, and where those members are located. On the East side you've got MUCH more choice, and you'd probably find just as good an example over there for the same money less transport costs.
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

tis a shame, be good if someone there had a shitty JB they could raid the required parts from to get her back in action.. its a maroon interior car isnt it. and most of the interior is gone? is it a D60 car?
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
JDSTAZ45
almost postwhore
Posts: 1250
Joined: Sat Feb 12, 2005 10:00 pm
Location: Inner West, Sydney

Post by JDSTAZ45 »

redzone wrote:tis a shame, be good if someone there had a shitty JB they could raid the required parts from to get her back in action.. its a maroon interior car isnt it. and most of the interior is gone? is it a D60 car?
Reading the guys description, it mainly has a black interior....

Anyone who's seen Hoony's car in the flesh will vouch it really stands out!

This car would look awesome if restored...which appears to be the replica of Hoony's car! Gold exterior with black interior.
I think most of the parts could come from the ebay/US to finish off and engine stuff locally!!

:beer
Imports.
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
NachoMan
nearly postwhore
Posts: 1589
Joined: Sat Jan 10, 2004 12:28 pm
Location: Perth (Morley), WA
Contact:

...

Post by NachoMan »

Black interior is the bomb! I got black in my GSR-V, and I prior to that I had always wanted a black interior. Lucky me I guess.
Well guys, you're welcome to it. I've got enough Starions to keep me going, not to mention a certain JB that I'd like to finish soon. I don't know how soon that might be though :?
Last edited by NachoMan on Fri Jan 25, 2008 4:17 am, edited 1 time in total.
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

if it was still there after i get rid of these 2 JB's i'd seriously consider it, just to save the thing....
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
Noddy
Enthusiast
Posts: 603
Joined: Thu May 24, 2007 11:15 pm
Location: Perth

Post by Noddy »

I'm only interested in a couple of bits :) ........still do not know what #JD it is but it would be a long road back to driving.

Shell is only worth $25 as scrap.... :(
1985 JB - owned from new.
1986 JD - used to own one.......
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

it'd cost well over a grand to get a car from there to here eh? anyone ever done it?? i have access to a complete JD drivetrain (yes red rocker cover motor etc) and most of the bits to get it up and running again. fkn hell what am i doing lol
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
JD_Stazza_Brendan
almost postwhore
Posts: 1131
Joined: Tue Jan 25, 2005 10:46 pm
Location: Mackay, QLD, Australia

Post by JD_Stazza_Brendan »

Its a JD.

They are totally different car to drive from any other Starion. (especially with D60 option)

They are about as rare as rocking horse shit.

You need any more reasons to do it :P
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.

Yes i have too many toys.
SOHC POWER
groupAralliart
BATHURST LEGEND 07
Posts: 948
Joined: Sun Feb 18, 2007 4:46 pm
Location: Brisbane

Post by groupAralliart »

Dave I would bank on $1500 from Perth at the moment unless you could wangle a piggy back
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

if i sold that white JB in time i might get it.....
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
Noddy
Enthusiast
Posts: 603
Joined: Thu May 24, 2007 11:15 pm
Location: Perth

Post by Noddy »

maybe if a national meet is organised we could trailer it over! :D
1985 JB - owned from new.
1986 JD - used to own one.......
skip
Registered Bitch
Posts: 267
Joined: Wed Jan 05, 2005 4:44 am
Location: Adelaide, South Australia

Post by skip »

I can vouch for the fact that JDs with the black interior are nice. I'd be tempted, but it's a little far away and needs too much work. I still have a list as long as my arm of things to do on mine...
hoongirl
Ace Girl Retraction
Posts: 1144
Joined: Thu Jan 08, 2004 2:18 pm
Location: Sydney
Contact:

Post by hoongirl »

If the compliance plate is in the back behind the seats then it would be a JD.

Charlie might be able to shed some light on how many JD's there were - afaik we have only found 50 or so...
User avatar
NXTIME
Registry Nazi
Posts: 2972
Joined: Thu Jan 08, 2004 3:14 pm
Location: Sydney, NSW

Post by NXTIME »

Highest I have found is 51. Yes, the compliance plate will be on the back behind the seats. Someone please get it for me.
Please register your vehicle details on the AUSTRALIAN STARION REGISTRY <HERE>


1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
User avatar
S73R
Big Dorifto
Posts: 72
Joined: Fri Dec 09, 2005 9:39 pm
Location: Loxton

Post by S73R »

if u guys are looking 4 a cheap staz look at mine
ja 1500 bucks cheak my post out
it will go quick
"Only one way to live, Full BOOOST!!!!!!!!"
Post Reply

Who is online

Users browsing this forum: No registered users and 35 guests