Autosalon september
Autosalon september
is neone gonna put there car in the show
-
- I like starions more
- Posts: 152
- Joined: Wed May 04, 2005 11:26 pm
- Location: Gold Coast
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
and even garry`s car wasn't eligible for judging coz its an 82 model and the cut off for auto salon is now 1988 (was 1986 til recently) but he was invited so really the only way to get your car in there if u aren`t invited is as part of a trade stand! garry`s car will be at brisbane auto salon again in october at this stage...
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
what a load of crap!!
what about all the wicked old toyotas/mazdas/datsuns and MITSUBISHIS!
take out all the honda front wheel drive shit and there'd be plenty of room for proper cars.
garys car should be there regardless :beer
what about all the wicked old toyotas/mazdas/datsuns and MITSUBISHIS!
take out all the honda front wheel drive shit and there'd be plenty of room for proper cars.
garys car should be there regardless :beer
FS: Ford 302ci Windsor. Race prepped block, Clevite bearings, ARP fixings, Hypertectic pistons, nitrided rods, knife edged crank, Gilmer drive, chrome moly rings, Yella Terra stage 3 heads, manly valves, Comp cams 294* solid roller, YT roller rockers, Funnelweb manifold, 2 inch spacer, Proform 830cfm carb, K&N 10" stack, ICE ignition. - 0437900210
sorry... you are so right
FS: Ford 302ci Windsor. Race prepped block, Clevite bearings, ARP fixings, Hypertectic pistons, nitrided rods, knife edged crank, Gilmer drive, chrome moly rings, Yella Terra stage 3 heads, manly valves, Comp cams 294* solid roller, YT roller rockers, Funnelweb manifold, 2 inch spacer, Proform 830cfm carb, K&N 10" stack, ICE ignition. - 0437900210
You gotta remember that most of the cars aren't ever driven and some can't be driven. Just look at that car with the engine covered in gold and shit like that, there was a electric turbo fan with the exhaust manifold covered in gold. Now how fast would the all drip off the first time the car is started.
Most of the cars are just plactic and fibreglass and they don't even worry about real springs just cut the originals and have the weight of all that fibreglass weigh the car down to lower it.
They have even had cars with apparant roll cages with padding over them are actually only pool noodles shaped to look like roll bars. Don't disgrace a car actually made of steel by putting it in an autosalon.
Try something actually worthwhile like a jamboree or a real car show like that.
Most of the cars are just plactic and fibreglass and they don't even worry about real springs just cut the originals and have the weight of all that fibreglass weigh the car down to lower it.
They have even had cars with apparant roll cages with padding over them are actually only pool noodles shaped to look like roll bars. Don't disgrace a car actually made of steel by putting it in an autosalon.
Try something actually worthwhile like a jamboree or a real car show like that.
There were a couple of nice cars at GCAS.
My mate had his Dad's M3 CSL there. It has 385mm 8 pot Brembos, Ohlins coil overs with external tanks, roll cage etc.
That car gives me a chubby just thinking about it. :)
Of course, it didn't get a trophy. A mechanically stock 1992 318i with a loud paint job and no springs won "top BMW". :LOL:
Phil
My mate had his Dad's M3 CSL there. It has 385mm 8 pot Brembos, Ohlins coil overs with external tanks, roll cage etc.
That car gives me a chubby just thinking about it. :)
Of course, it didn't get a trophy. A mechanically stock 1992 318i with a loud paint job and no springs won "top BMW". :LOL:
Phil
Purple JA, full cage, 6G72TT, collecting dust
White JA, 19x10s, GT30, Alcons, DMS, Crower 2.4, Hypertune intake, M800.....
-
- I've been here before
- Posts: 209
- Joined: Sat May 28, 2005 7:10 pm
- Location: Aus - Goldcoast - Chevron
- Contact:
well the rx3 that was next to gary's car went on the dyno even tho it was an older car. i think the guy said the engine had to be later than an 88 or 86 so the rx3 had an exception. maybe if u get a staz and put a new evo engine in it then they would use it on the dyno. can someone confirm this
JB Starion - 2 tone Maroon/Silver, L300 MPI, KKR 430, Simmons, RX7 550cc, bosch 044 fuel pump..
194.7HP atw!!!
194.7HP atw!!!
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
a little birdy told me they will be having an auto salon "old school" section soon. thats all i know at this stage!
but i agree TOTALLY on the jamboree thing, i`ve raced at every jamboree since 1997 and wouldn`t miss it for a family funeral!
but i agree TOTALLY on the jamboree thing, i`ve raced at every jamboree since 1997 and wouldn`t miss it for a family funeral!
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
- Glen GSR III
- guess its me thats broke
- Posts: 581
- Joined: Wed Jan 11, 2006 7:34 pm
- Location: Toowoomba, Queensland
Any sydney peoples want to go for beers and pizza after auto salon in sept? I'm going down with some mates and it would be great to catch up with everyone while im down there.
I figure if we start organising now we should be able to get more people to go. :beer
I figure if we start organising now we should be able to get more people to go. :beer
82 GSR III starion (respray nearly complete!)
83 JA Starion...Daily Driver
01 KTM 520 trail bike (reason the staz isnt finished yet)
83 JA Starion...Daily Driver
01 KTM 520 trail bike (reason the staz isnt finished yet)
Who is online
Users browsing this forum: No registered users and 15 guests