It's ALIVE!!!
Posted: Sat May 20, 2006 9:12 pm
My Lotus seven Clubbie finally fired back into action after its unfortunate engine demise due to a wandering conrod caused by a $4 banjo fitting on the external wastegate.
The new donk:
4G63B Turbo
Balance shafts removed
Custom sump to hold 6L of oil
Nitrided crank
Forged H beam conrods
Forged Pistons
Cometic head gasket
550cc Injectors
Wolf 3D ECU
T03/04 Turbo
Custom exhaust manifold
Tial 38mm External wastegate
3" Exhaust
Custom front mount intercooler
The old engine made 150 rwkw's at only 10 PSI and I managed a 0-100km time of 3.8 seconds, so looking forward to running 17 PSI on the new one when it's run in. Will hopefully make 200+ rwkw's and will maybe break into the sub 3 second 0-100km bracket (Traction allowing).
Go the 4G63!!!
Good to be back on the road again with the rest of you.
http://s32.photobucket.com/albums/d13/G ... ure053.jpg
http://s32.photobucket.com/albums/d13/G ... 1760ff.jpg
http://s32.photobucket.com/albums/d13/G ... 57301f.jpg
The new donk:
4G63B Turbo
Balance shafts removed
Custom sump to hold 6L of oil
Nitrided crank
Forged H beam conrods
Forged Pistons
Cometic head gasket
550cc Injectors
Wolf 3D ECU
T03/04 Turbo
Custom exhaust manifold
Tial 38mm External wastegate
3" Exhaust
Custom front mount intercooler
The old engine made 150 rwkw's at only 10 PSI and I managed a 0-100km time of 3.8 seconds, so looking forward to running 17 PSI on the new one when it's run in. Will hopefully make 200+ rwkw's and will maybe break into the sub 3 second 0-100km bracket (Traction allowing).
Go the 4G63!!!
Good to be back on the road again with the rest of you.
http://s32.photobucket.com/albums/d13/G ... ure053.jpg
http://s32.photobucket.com/albums/d13/G ... 1760ff.jpg
http://s32.photobucket.com/albums/d13/G ... 57301f.jpg