Page 1 of 2
kW rating?
Posted: Thu Jun 23, 2005 6:29 pm
by iXNAY
hey guys.
just wondering what kW all you guys have at the wheels? and what your kW goal is?
i have 120rwkW on 15PSI
i would like to crack the 200kW mark.
greetz
Posted: Thu Jun 23, 2005 6:57 pm
by CussCuss
120rwkw @11psi 'happy' dyno
Posted: Thu Jun 23, 2005 7:33 pm
by StarionPWR
212kw at the wheels at 14psi
Posted: Thu Jun 23, 2005 7:49 pm
by mrb1
149kW @ 15.5 psi JA 2.0 and 182kW @ 16psi 2.6 Widebody.
Goals MORE :)
Posted: Thu Jun 23, 2005 9:57 pm
by hcca
I am aiming for 300kw at the wheels @10psi.. currently I have 0kw so there's a bit of work to be done :)
Posted: Thu Jun 23, 2005 10:14 pm
by iXNAY
hcca wrote:I am aiming for 300kw at the wheels @10psi.. currently I have 0kw so there's a bit of work to be done
nearly there only a little bit to go :)
Posted: Thu Jun 23, 2005 11:07 pm
by hcca
It goes fast downhill :)
Posted: Fri Jun 24, 2005 12:39 am
by SIRIUS
101.6kw @ 9psi rofl
Posted: Fri Jun 24, 2005 1:01 am
by Starion_Turbo
I'll share when my intercooler arrives, I get piping and have a dynotune
...
Posted: Fri Jun 24, 2005 11:56 am
by bigmoz
111@7psi that was 1000km after i had the car rebuilt dont know what i would do now
bigmoz :pimp
Posted: Sat Jun 25, 2005 2:29 am
by tmz_99
im hoping for 500-550hp at the engine, so between 350-370 at the wheels would be nice :)
Posted: Mon Jun 27, 2005 9:13 pm
by Fuel
Currently 151rwkw on 15psi and 120rwkw on 9psi
Around 150 is plenty for a street car.
Posted: Tue Jun 28, 2005 8:11 am
by starion4me
234kw@wheels 21psi. Im not after anymore power. Time to focus on the looks of the car
Posted: Tue Jun 28, 2005 9:28 am
by WidebodyWoody
I am aiming for 300kw at the wheels @10psi.. currently I have 0kw so there's a bit of work to be done
WOW, you have more then me.
Seriously though, I can't remember hom much I have at the wheels. Whats 250rwhp? Because I have that on 9psi.
And that should hopefully go up when I get to put boost up and the new inlet system, and cooler piping.
Posted: Tue Jun 28, 2005 9:53 am
by hcca
250hp=186kw
300kw=402hp
Remember that this is my engine bay (and that number shouldn't be too difficult to achieve at 10psi):
