Page 1 of 1
Fitting Intercooler
Posted: Thu Jan 22, 2004 2:12 pm
by Barney
I was thinking of posting progress photos of the fitting of my new intercooler
Would anybody be interested, or a i waisting my time :?:
Posted: Thu Jan 22, 2004 2:35 pm
by Cookiemonster
Don't come in here and waste our time with that trivial crap..
nah just joking. :)
Im sure plenty of people would like to follow the progress.
Posted: Thu Jan 22, 2004 3:29 pm
by Alspos
Especially where you run pipework, mount cooler etc.
Posted: Thu Jan 22, 2004 10:32 pm
by ProZac
so in conclusion, POST POST POST.
Posted: Thu Jan 22, 2004 11:24 pm
by Barney
OK
Posted: Fri Jan 23, 2004 9:09 pm
by pcuser51
:D Bring those photos on barney
Posted: Sat Jan 24, 2004 3:17 pm
by Barney
dont forget its a sapporo not a starion, so the mountings and pipes might be different :?
AShly
www.pbase.com/ashly/inbox
Posted: Sat Jan 24, 2004 4:07 pm
by ProZac
Im not seeing any new intercooler mounting pictures? I do have bung eyes tho...
..
Posted: Sun Jan 25, 2004 1:58 pm
by Project2501
If we starion owners cop the cordia stuff, you must cop heaps of Scorpion comments.. A friend in Melbourne has a Sapporo as well, but it is in the process of being rebuilt from scratch. Very stealthy..
cheers
tom.
Posted: Mon Jan 26, 2004 3:16 am
by Barney
I just say it a scorpion with starion drive line.
and thay say, isn't that a 2 door sigma. :roll:
Posted: Mon Jan 26, 2004 4:09 am
by Barney
I have added a photo of the old cooler fitted, with the new one sitting below it. the new cooler has yet to have the end tanks made
i have more photos but my works firewall keeps stopping me from adding them
note: the old cooler is for sale. its ok if running the standard intake manifold. i also have alot of the pipe work, including the piece that clamps up to the throtlebody. more details call 0412 475 321
www.pbase.com/image/25445166
ASHLY
Posted: Mon Jan 26, 2004 1:39 pm
by Cam
Barney should be good. How come you didnt go for a little bit bigger cooler?
It looks like you've got the room
Posted: Mon Jan 26, 2004 7:32 pm
by Barney
1. i got this core cheap :)
2. it will look alot bigger once it has tanks.
I took it to SST automotives in perth. Steve said that cooler is good for 350hp @ the wheels. more than i plan on having
ASHLY
Posted: Mon Jan 26, 2004 8:36 pm
by Barney
iv created a dedicated link to the intercooler project. extra photo added
www.pbase.com/ashly/intercooler_project