Austarion

Posted: **Sat Aug 16, 2014 4:23 pm**

What happens if I remove OEM ecu?

I have an EMS 8860 but does that mean I can completely remove the OEM ecu? Or are there some outputs I will still need?

Also the the old ecu loom does it have wires that need to be retained for lights, dash, fuel pump, power windows etc...?

Going to try to tidy up the wiring.

Posted: **Sat Aug 16, 2014 11:44 pm**

8860 will run everything on the engine etc side.

Headlights etc is all the other loom pete.

Posted: **Sun Aug 17, 2014 12:02 pm**

How is your fuel pump wired up? If I recall the ECU provides power to fuel pump when you are cranking and then the relay takes over after it starts.

Posted: **Mon Aug 18, 2014 10:00 pm**

Yeah the ems was wired into the OEM loom to the fuel pump relay.

If I remove the eci control relay (e8t00571) gold box near the old ecu will it mess with other non ecu/ems stuff/wiring?

:beer