some 4wd film

A place for general discussion. Catch up with mates, post pics, or if you just want to pick on e-thugs.
Post Reply
smodgee
I like starions
Posts: 108
Joined: Sun Apr 01, 2007 7:12 pm
Location: Otorohanga NZ

some 4wd film

Post by smodgee »

haven't seen this one before enjoy :beer


sohc 82 a182a rally-car,cam, mpi,vf8 turbo,v5 link,ross pistons, gsr injectors, Bosch 909 fp, nearly ready for dyno, if all calculations are right 190rwkw, hopefully :)
sohc 82 a183a rally-car, standard besides balance shafts removed,no airflow meter, lsd, 1080kg
User avatar
BILTEL
Big Dorifto
Posts: 79
Joined: Sun Aug 28, 2005 6:52 pm
Location: Silverstone, UK

Post by BILTEL »

Cooooooooolllllllllllllll :beer
Classic Touring Car racer

#20 Pre 93 touring cars
www.classictouringcars.com

RWD is for Heros, 4WD is for Zeros!
User avatar
Alspos
Flucking kwankers
Posts: 4107
Joined: Thu Jan 08, 2004 2:09 pm
Location: Melbourne
Contact:

Post by Alspos »

With nipple!
smodgee
I like starions
Posts: 108
Joined: Sun Apr 01, 2007 7:12 pm
Location: Otorohanga NZ

Post by smodgee »

Alspos wrote:With nipple!
yea saw that too but was waiting for someone else to notice :D
cars and boobs cant really ask for anything more
sohc 82 a182a rally-car,cam, mpi,vf8 turbo,v5 link,ross pistons, gsr injectors, Bosch 909 fp, nearly ready for dyno, if all calculations are right 190rwkw, hopefully :)
sohc 82 a183a rally-car, standard besides balance shafts removed,no airflow meter, lsd, 1080kg
User avatar
JAS
Enthusiast king
Posts: 993
Joined: Sun Mar 14, 2004 8:27 am
Location: Christchurch

Post by JAS »

Anyone notice the oversized B pillar air intakes??
1984 Sigma Super, Turbo Wagon
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi

http://www.facebook.com/marvinmartiannz

ImageImage
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

yeap - i'm assuming they are that way to let air into the back area since it is sealed off from the driver's cabin?
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
smodgee
I like starions
Posts: 108
Joined: Sun Apr 01, 2007 7:12 pm
Location: Otorohanga NZ

Post by smodgee »

i wonder why they have sealed it off?? looks like there is some of the fuel system in the boot, cant see any oil coolers or anything back there
sohc 82 a182a rally-car,cam, mpi,vf8 turbo,v5 link,ross pistons, gsr injectors, Bosch 909 fp, nearly ready for dyno, if all calculations are right 190rwkw, hopefully :)
sohc 82 a183a rally-car, standard besides balance shafts removed,no airflow meter, lsd, 1080kg
OLD FART
Austarion Occupant
Posts: 3448
Joined: Sun Jun 19, 2005 1:34 pm
Location: Brisbane

Post by OLD FART »

Are you sure the back was sealed off ???
I would have thought that the B pillar vent scoups were there to preasureize the interior to keep out dust
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
smodgee
I like starions
Posts: 108
Joined: Sun Apr 01, 2007 7:12 pm
Location: Otorohanga NZ

Post by smodgee »

OLD FART wrote: I would have thought that the B pillar vent scoups were there to preasureize the interior to keep out dust
yea thats what i would of thought, but if you look from 2:32-2:46mins on first part it looks sealed
sohc 82 a182a rally-car,cam, mpi,vf8 turbo,v5 link,ross pistons, gsr injectors, Bosch 909 fp, nearly ready for dyno, if all calculations are right 190rwkw, hopefully :)
sohc 82 a183a rally-car, standard besides balance shafts removed,no airflow meter, lsd, 1080kg
airbats801
Enthusiast
Posts: 737
Joined: Wed Feb 02, 2005 2:46 pm
Location: oregon, USA
Contact:

Post by airbats801 »

isnt the radiator in the back on those? I know most of the group b cars ran them on the back. It's hard to say though. A lot of evolution went on with the car over the short period it was tested. I know the one pictured lost a lot of weight from the original design.

if you look at this model it appears to have some kind of cooling in the spoiler

Image
'78 Colt cp, 80 challenger "scorpion" 5spd g54bt conversion almost complete, '80 plymtouh arrow "might max" , '90 mitsu terror van "spacewagon"
80's Hero
Image
smodgee
I like starions
Posts: 108
Joined: Sun Apr 01, 2007 7:12 pm
Location: Otorohanga NZ

Post by smodgee »

its like the old grp a rx7s had the oil coolers as part of the rear wing
sohc 82 a182a rally-car,cam, mpi,vf8 turbo,v5 link,ross pistons, gsr injectors, Bosch 909 fp, nearly ready for dyno, if all calculations are right 190rwkw, hopefully :)
sohc 82 a183a rally-car, standard besides balance shafts removed,no airflow meter, lsd, 1080kg
OLD FART
Austarion Occupant
Posts: 3448
Joined: Sun Jun 19, 2005 1:34 pm
Location: Brisbane

Post by OLD FART »

smodgee wrote:
OLD FART wrote: I would have thought that the B pillar vent scoups were there to preasureize the interior to keep out dust
yea thats what i would of thought, but if you look from 2:32-2:46mins on first part it looks sealed
Had another look and the vents/scoups do not appear to open into the rear so I still think that they were intended to preasureize the driving compartment
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
smodgee
I like starions
Posts: 108
Joined: Sun Apr 01, 2007 7:12 pm
Location: Otorohanga NZ

Post by smodgee »

OLD FART wrote:
smodgee wrote:
OLD FART wrote: I would have thought that the B pillar vent scoups were there to preasureize the interior to keep out dust
yea thats what i would of thought, but if you look from 2:32-2:46mins on first part it looks sealed
Had another look and the vents/scoups do not appear to open into the rear so I still think that they were intended to preasureize the driving compartment
yea that wall separating the compartments is a long way back on the strut towers
sohc 82 a182a rally-car,cam, mpi,vf8 turbo,v5 link,ross pistons, gsr injectors, Bosch 909 fp, nearly ready for dyno, if all calculations are right 190rwkw, hopefully :)
sohc 82 a183a rally-car, standard besides balance shafts removed,no airflow meter, lsd, 1080kg
Post Reply

Who is online

Users browsing this forum: No registered users and 33 guests