Ideas for a daily driver $5-8k
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
Well we tried to tell ya! For your requirements, i'd be looking at a ba falcon wagon. Handy as a tow vehicle for your project car..
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
-
- nearly postwhore
- Posts: 1446
- Joined: Sun Jun 19, 2005 7:27 pm
- Location: Sunny Brisbane Australia!
Yeah by todays standards they are appalling, however you can't expect much from something which was based on an economy vehicle from 20 years ago! The Satria is essentially the same vehicle with the same crash safety standards.
Fuel consumption would be quite high on the priority list which is why I want to stay with a mid sized vehicle around 2L, 5spd and diesel if possible. Am trying to hunt down a diesel 5spd Pug 406 or a Citroen Xantia as I know they can get 1000kms to a tank, and apart from the interior generally falling apart they are quite a reliable vehicle in the engine/driveline department.
I think I will just have to keep an eye out and hopefully pick something up cheap needing a small amount of work.
Fuel consumption would be quite high on the priority list which is why I want to stay with a mid sized vehicle around 2L, 5spd and diesel if possible. Am trying to hunt down a diesel 5spd Pug 406 or a Citroen Xantia as I know they can get 1000kms to a tank, and apart from the interior generally falling apart they are quite a reliable vehicle in the engine/driveline department.
I think I will just have to keep an eye out and hopefully pick something up cheap needing a small amount of work.
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
- Sargeant_Khan
- Enthusiast
- Posts: 673
- Joined: Thu Dec 16, 2004 9:31 pm
- Location: Ipswich
I suppose when you're considering a european vehicle for cheap fuel consumption on a tight budget your not considering the cost of parts on a vehicle as old as what will be in your budget. My girlfriends pug gti180 is a nightmare. Everything comes from UK ebay or its ludicrous. Alternatively learn french.
Goodluck with your search.
:beer
Goodluck with your search.
:beer
PIZZA DELIVERY GUY....No more
-
- nearly postwhore
- Posts: 1446
- Joined: Sun Jun 19, 2005 7:27 pm
- Location: Sunny Brisbane Australia!
yeah I know Europeans aren't generally known to be as reliable as a Toyota etc, but all of us here own and drive Mitsubishis which I'm sure we didn't buy them specifically for their reliability! As I said I'm happy to trade off a little bit of reliability in favour of not having a mind numbing boring car to experience. I've had good runs from my previous European vehicles I've owned like the Peugeot 406, Volvo 850R, VW Golf VR6, Ford Mondeo etc.
I feel I've owned a fair few cars (over 50) in my short life time so far and it didn't take me long to realise there's some really decent cars which come from outside of Japan, and that you can have an exciting driver experience with reliability. I find the majority of the Japanese commuter-orientated cars (ie Corollas, Pulsars, Accords, Lancers etc) are just too boring and often not that well equipped.
I feel I've owned a fair few cars (over 50) in my short life time so far and it didn't take me long to realise there's some really decent cars which come from outside of Japan, and that you can have an exciting driver experience with reliability. I find the majority of the Japanese commuter-orientated cars (ie Corollas, Pulsars, Accords, Lancers etc) are just too boring and often not that well equipped.
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
- Sargeant_Khan
- Enthusiast
- Posts: 673
- Joined: Thu Dec 16, 2004 9:31 pm
- Location: Ipswich
-
- nearly postwhore
- Posts: 1446
- Joined: Sun Jun 19, 2005 7:27 pm
- Location: Sunny Brisbane Australia!
Yep. You must be used to the older gutless Japanese diesels. Go take a current shape Ford Mondeo turbodiesel for a spin - it is quicker than the petrol and is so smooth that you hardly even can tell it's a diesel. The Pug 406 1.9 XUD diesel is a bit of an old agricultural engine, but they are plenty powerful enough for the capacity and return outstanding fuel economy - and of course the chassis the 406 has allows you to chuck it through the bends without wallowing around and feeling uneasy like just about every Camry I've driven, yet gives a softer and smoother ride than most other cars.
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
- Sargeant_Khan
- Enthusiast
- Posts: 673
- Joined: Thu Dec 16, 2004 9:31 pm
- Location: Ipswich
That 100hp pug diesel must have been fun in corners at the bottom of a hill lol, just kidding man but seriously the pug is a great car but when $500 alternators need replacing and then $280 for a new key because it has to be coded to the car and then clutch, brakes, injectors, coils, timing belts, water pumps. It all adds up and really its just general maintenance you'd carry out on any car only ex france is a shitload more ($7.80 for a BOLT!) not to mention how much of a piece of shit the car is to work on.
I cant imagine many pugs being better in corners than the gti180, this thing is amazing as they had designed it to be so, but in reality I can't drive it like that on the road, no way is it practical to do that kind of thing on the street(killing pedestrians is frowned upon over here). After owning the pug for two years now we wish hail would destroy it so we could buy an 89 corolla, it just seems practical and cheap. A solution to your problem might be a slow cheap diesel turbo and a $1500 go kart or commodore and a cams license.
:beer
P.S my way is the only right way :D
PPS never driven a diesel but I have never seen one at the track, actually I think the water truck is diesel :D :beer
I cant imagine many pugs being better in corners than the gti180, this thing is amazing as they had designed it to be so, but in reality I can't drive it like that on the road, no way is it practical to do that kind of thing on the street(killing pedestrians is frowned upon over here). After owning the pug for two years now we wish hail would destroy it so we could buy an 89 corolla, it just seems practical and cheap. A solution to your problem might be a slow cheap diesel turbo and a $1500 go kart or commodore and a cams license.
:beer
P.S my way is the only right way :D
PPS never driven a diesel but I have never seen one at the track, actually I think the water truck is diesel :D :beer
PIZZA DELIVERY GUY....No more
-
- nearly postwhore
- Posts: 1446
- Joined: Sun Jun 19, 2005 7:27 pm
- Location: Sunny Brisbane Australia!
try watching something other than V8 supercars :P In the world touring car series Seat have a diesel which is doing just as well as most of the petrol cars.
There are plenty of Japanese cars which require a $500+ key. Most late model Toyotas fall into this category in fact. I only had one or two small things go wrong with my 406 when I had it and they weren't very costly to fix. It more than made up with it with its comfortable seating and ride, nice interior and exterior styling, great fuel economy and nice handling through the corners despite being able to soak up just about every bump in the road.
There are plenty of Japanese cars which require a $500+ key. Most late model Toyotas fall into this category in fact. I only had one or two small things go wrong with my 406 when I had it and they weren't very costly to fix. It more than made up with it with its comfortable seating and ride, nice interior and exterior styling, great fuel economy and nice handling through the corners despite being able to soak up just about every bump in the road.
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
- Sargeant_Khan
- Enthusiast
- Posts: 673
- Joined: Thu Dec 16, 2004 9:31 pm
- Location: Ipswich
What about one of these? The Diesel ones go well too. :D
http://www.ebay.com.au/itm/120774633401 ... 1423.l2649
Fits the budget! :D
http://www.ebay.com.au/itm/120774633401 ... 1423.l2649
Fits the budget! :D
-
- nearly postwhore
- Posts: 1446
- Joined: Sun Jun 19, 2005 7:27 pm
- Location: Sunny Brisbane Australia!
certainly is one to consider, but it has the older Zetec belt-driven engine (same engine fitted to the Mk1 and Mk2 Mondeos) rather than the newer chain-driven Duratec engine. Not a fan of the interior, looks too AU Falcon like - but the exterior looks sharp enough.
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
you're not fussy are you?
if you test drove as keenly as you type you'de be sorted!
if you test drove as keenly as you type you'de be sorted!
FS: Ford 302ci Windsor. Race prepped block, Clevite bearings, ARP fixings, Hypertectic pistons, nitrided rods, knife edged crank, Gilmer drive, chrome moly rings, Yella Terra stage 3 heads, manly valves, Comp cams 294* solid roller, YT roller rockers, Funnelweb manifold, 2 inch spacer, Proform 830cfm carb, K&N 10" stack, ICE ignition. - 0437900210
-
- nearly postwhore
- Posts: 1446
- Joined: Sun Jun 19, 2005 7:27 pm
- Location: Sunny Brisbane Australia!
I guess you can say I am fussy, I'm not going to chuck upwards of $8k on a car which isn't going to be great value for money. Who is going to do that?
As I've said right from the beginning, I don't know the market in Australia, nor do I know exactly what cars are available and what aren't. This is why I am asking for ideas on what cars I should be looking at and what I should be paying for them, basing my needs on what I have owned previously.
So far I've learned that I need to either increase my budget or decrease my expectations, which I am coming to terms with. But I feel people should read and understand where I'm coming from and what my requirements are before suggesting Commodores, Falcons, Starions, small 3dr hatches or Galant VR-4s.
Thanks.
As I've said right from the beginning, I don't know the market in Australia, nor do I know exactly what cars are available and what aren't. This is why I am asking for ideas on what cars I should be looking at and what I should be paying for them, basing my needs on what I have owned previously.
So far I've learned that I need to either increase my budget or decrease my expectations, which I am coming to terms with. But I feel people should read and understand where I'm coming from and what my requirements are before suggesting Commodores, Falcons, Starions, small 3dr hatches or Galant VR-4s.
Thanks.
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
Who is online
Users browsing this forum: No registered users and 8 guests