Back at the track

Cookiemonster · Post by **Cookiemonster** » Thu Nov 03, 2005 4:00 pm

toysrus wrote:
Cookiemonster wrote:
avandull wrote:What spring rate springs have you put in you car Cookie?
Front: 400lb
Rear: 320lb
How much does your track car weigh at the Front and Rear Cookie ?

Front: 601kg
Rear: 559kg

Cookiemonster · Post by **Cookiemonster** » Thu Nov 03, 2005 4:01 pm

toysrus wrote:And I assume you guys are running such high spring rates more so as a result of using standard/stock dampener rates, correct ?

Incorrect. Custom valved Koni's.

toysrus · Post by **toysrus** » Thu Nov 03, 2005 4:13 pm

I got the answer after two incorrect replys you know.... :x :glare:

So what dampener rates are you guys running with your Springs then ?

Cookiemonster · Post by **Cookiemonster** » Thu Nov 03, 2005 5:26 pm

toysrus wrote:So what dampener rates are you guys running with your Springs then ?

Wouldn't have a clue. You would have to ask Mr Noltec.

toysrus · Post by **toysrus** » Thu Nov 03, 2005 7:47 pm

Cookiemonster wrote:
toysrus wrote:So what dampener rates are you guys running with your Springs then ?
Wouldn't have a clue. You would have to ask Mr Noltec.

So the all knowlegeable and wise Cookiemonster doesn't know ?? :D LOL rofl

avandull · Post by **avandull** » Thu Nov 03, 2005 7:54 pm

Cookiemonster: Do you know how much the car the weighs?

The car was weighed on the 5.9.2004 after the roll cage was fitted, it weighed 1200Kg.

airbats801: please get me the part number for the konis though

The rear Koni dampers inserts part number is 86-2105sp1 and they were re-valved to suit the springs. I cant find the part number for the front dampers, you could ring koni, they might know.

mrb1 · Post by **mrb1** » Thu Nov 03, 2005 8:06 pm

toysrus wrote:I got the answer after two incorrect replys you know.... :x :glare:

So what dampener rates are you guys running with your Springs then ?

Wouldn't have a clue. You would have to ask Mr Noltec.

toysrus · Post by **toysrus** » Thu Nov 03, 2005 9:36 pm

When I give Mr Noltec a call tomorrow, I'll let him know to bump up his prices a few bob more so that you guys ask WTF am I getting for my $XXX next time LOL

rofl

avandull · Post by **avandull** » Fri Nov 04, 2005 12:16 pm

The front and rear damper inserts have the same Koni part number. They are just valved differently, and the rear dampers come with a weld on collar.

Cookiemonster · Post by **Cookiemonster** » Fri Nov 04, 2005 4:07 pm

avandull wrote:The car was weighed on the 5.9.2004 after the roll cage was fitted, it weighed 1200Kg.

Is that with you in it? The weights I posted was with me in the drivers seat.

avandull · Post by **avandull** » Mon Nov 07, 2005 7:26 pm

Almost no fuel, and no one in it.

Austarion

Back at the track

Who is online