Security Cam's

A place for general discussion. Catch up with mates, post pics, or if you just want to pick on e-thugs.
Post Reply
flav
Austarion Occupant
Posts: 3374
Joined: Thu Apr 15, 2004 9:57 pm
Location: Melbourne

Security Cam's

Post by flav »

I would like to install a bunch of cameras around the place after all the thefts. Does anyone know anything about these products? We need about 4 cameras at least. We already have 1 but that is just not enought.
Im happy to buy from ebay or even buy another computer if we need too. We have 3 computers here but im not sure if that will help at all? They have to run 24 hrs and be able to record continually also.
User avatar
WANTSOM
Pushing my luck
Posts: 2115
Joined: Mon Jan 12, 2004 1:43 pm
Location: Sydney

Post by WANTSOM »

I work for Rexel Electrical , we have a Video division that specialises in CCTV security etc with a branch in Melbourne. Its all good gear with all that you are lokoking for

If you are interested I can make sure you get mates rates.
Never argue with an idiot, it brings you down to their level and they beat you with experience.
digitalsko
I've been here before
Posts: 209
Joined: Sat May 28, 2005 7:10 pm
Location: Aus - Goldcoast - Chevron
Contact:

Post by digitalsko »

i just got a job workin in the CCTV sector. my boss has some stand alone dvr's that he might wana get rid of cheaply. normally $1k but ill see what he will do em for. as for the cameras just take a pic with a digi cam n let me know what the lighting is like n ill see wat u need. as for recording it will record on motion detection and depends on the size of the hard drive how long it store the footage. i should be coming down to melb next week for a job so just drop me an email. ill pm u my details.
cheers
JB Starion - 2 tone Maroon/Silver, L300 MPI, KKR 430, Simmons, RX7 550cc, bosch 044 fuel pump..
194.7HP atw!!!
flav
Austarion Occupant
Posts: 3374
Joined: Thu Apr 15, 2004 9:57 pm
Location: Melbourne

Post by flav »

Thanks guys..i need full exterior coverage around the property and also want it extended to the rear public car park. Its all out door and it has to work day and night. It also has to be removable when i leave this property. Cameras recording with motion is a good thing, but i want them runing all the time, only recording with motion..perhaps after hours recording.
User avatar
AB
Mine is bigger than yours
Posts: 281
Joined: Wed May 25, 2005 12:27 am
Location: Wellington, New Zealand

Post by AB »

I use a software based DVR called i-catcher console it's not that cheap but still cheaper than buying a standalone DVR if you already have a decent computer to run it on. There is also a good open source (free) software DVR called Zonealarm but that only runs on Linux. The advantage of a software DVR is it has a much greater range of customization, it can be configured to alert you by email/sms/website when there is motion detected on a particular camera, it has a huge range of parameters that can be adjusted in its motion detection and the cameras can be configured to only record at certain times. One of the most important features you should consider is storing a copy of the saved images off site as they're recorded. It's no use to you if your place is broken into and they steal your computer/DVR. For this you'll need a good reliable broadband connection at both ends, or another option is to have the system inaccessible on site, say in the attic or a hidden room and then access it by remote desktop or something similar. You'll also want to consider running a UPS on your entire system, computer/DVR, all cameras, and router/modem if applicable. Again your system becomes useless without one if someone shuts off the power before breaking in.

As far as cameras go eBay would be a great place to have a look. I've never even considered buying new because good second hand ones can be bought for around 1/4 the price of new, but if your budget allows then you could save a lot of time by buying new. Jaycar have a wide range of surveillance products and are worth checking out. Almost all cameras come standard with night vision via infra-red L.E.D.s these days so darkness shouldn't be a problem. The range is usually about 15 m but can be extended with infra-red spotlights.
User avatar
Alspos
Flucking kwankers
Posts: 4107
Joined: Thu Jan 08, 2004 2:09 pm
Location: Melbourne
Contact:

Post by Alspos »

Email me Flav.

It's what we do. Well one division sources and installs all that crap.

Continuous recording on PC, internet access, motion sensing, night time stuff.

I'll ask a few questions and see what I can dig up.
User avatar
madeofmilo
Enthusiast
Posts: 578
Joined: Fri May 21, 2004 5:53 pm
Location: Melb - East

Post by madeofmilo »

flav i can do your cabling and hookup for once you decide on which brand/combination you want.

There is a good one with 4cameras and harddrive that takes once still shot a second and records for up to 4 weeks. These are good because usually you don't need 16 - 20fps instead one good quality shoot per second 'cos you can use your computer to zoom and get much finer details even facial scars and tats. They are $2000 fully installed.

Let me know.

Cheers Dave
My JA has perfect motor - FMIC - forgies - high flow head but...rusted front guards and keyed on every panel. Time to get serious or time to take it to the tip.
User avatar
Alspos
Flucking kwankers
Posts: 4107
Joined: Thu Jan 08, 2004 2:09 pm
Location: Melbourne
Contact:

Post by Alspos »

This sort of thing is what you're after.

http://www.ness.com.au/ECODVR.htm

http://www.ness.com.au/dome_cameras.htm#RUGGED

At least have a look over the brochures and stuff to get a better idea of what's out there.
flav
Austarion Occupant
Posts: 3374
Joined: Thu Apr 15, 2004 9:57 pm
Location: Melbourne

Post by flav »

Thanks Al, i will have a bit of a look through it when the kiddies go to sleep and i get some spare time!
Post Reply

Who is online

Users browsing this forum: No registered users and 25 guests