What happens when you pull the indicator/wiper switch towards you?
Or better yet what is meant to happen?
My guess is you get the headlights turn on, they pop up turn off then fall down again?
Well thats what my old car used to do.
My new one only lights up the ground under the car. cool effect in its self but both Decoy and I dont get them to come up.
Is it just a simple relay/fuse problem or are all models berfore a certain date meant to do this?(light up ground only)
My lights work normally with power switch just cant get them to do a quick flash.
Headlights
Headlights
TEAM SR: we brake for 1Jz's!
have u been roasted lately?
have u been roasted lately?
- Starion_Turbo
- Enthusiast king
- Posts: 898
- Joined: Wed Dec 08, 2004 5:32 pm
- Location: South Australia
- Contact:
yeah they should popup go on and stay on until you release the lever, then they turn off and after a second they go back down.
when it does this I belive they light up in high-beam mode.
mine does this.
when it does this I belive they light up in high-beam mode.
mine does this.
Powerplant: Chipped stock ECU, 2044cc, 8.5:1, head intake enlarged and polished, exhaust manifold enlarged,
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
mine
mine do pop up they just light up the ground around me.... if you want to warn some one about a speed camera i just use the wsitch that pops them up without the light on then pull the indicator stick
bigmoz :pimp
bigmoz :pimp
85 JB, forged, larger valves, ported and polished microtech, sonata mpi, td06 20g, intercooler, willwood brakes, koni suspention, 3.9LSD and more shit i cant remember
82 JA, blueprint SIRUS 4g63, dumped and a cooler 17's, exhaust... DEAD :(
big moz (chopyou@hotmail.com)
82 JA, blueprint SIRUS 4g63, dumped and a cooler 17's, exhaust... DEAD :(
big moz (chopyou@hotmail.com)
- SpidersWeb
- postwhore!
- Posts: 1984
- Joined: Wed Jan 28, 2004 2:29 am
- Location: Wellington, NZ
Yes, it just needs to connect the high beam and headlamp power lines with two relays, or one with a double switch.
My 85 definately did it. Havent tried it on the 82. Most cars in general have it. Its for signalling other drivers - and I know in this country its used 90% of the time to warn oncoming traffic about nearby police officers. The other 10% is normally a small child or similar lodged in your front air damn.
My 85 definately did it. Havent tried it on the 82. Most cars in general have it. Its for signalling other drivers - and I know in this country its used 90% of the time to warn oncoming traffic about nearby police officers. The other 10% is normally a small child or similar lodged in your front air damn.
1997 Mitsubishi Lancer Evolution IV 4G63BT
1996 Nissan Maxima VQ30DE (for sale, suit someone who likes the feel of boats when driving)
1996 Nissan Maxima VQ30DE (for sale, suit someone who likes the feel of boats when driving)
'83 model JA and JB/JD were fitted with 2 extra relays, which are shown as one "PASSING RELAY" on the wireing diagrams.
part of this relay function seems to be in the center console, somewhere near the drivers left knee. the other part is in the engine bay, near the battery (i think!). this is the bit that sometimes fails, thus causing the popups to stay up, for those who have/had this problem.
part of this relay function seems to be in the center console, somewhere near the drivers left knee. the other part is in the engine bay, near the battery (i think!). this is the bit that sometimes fails, thus causing the popups to stay up, for those who have/had this problem.
Who is online
Users browsing this forum: No registered users and 2 guests