hey guys am trying to track down the metal flange gasket for the turbo downpipe from a TC06 with the 3 bolt flange (ie JA/JB Starion, FWD Sigma Turbo, AA/AB Cordia Turbo).
I was supplied an ACL LA133 but it is too small, it is the right shape but just shrunken about 10-20% - looks to be for a TC05 perhaps?
A permaseal gasket part number would be cool too if someone has it on hand.
Cheers!
Phil
*edit* I just tried the LA133 against two TC05s I have and even then the gasket is still too small, perhaps the gasket is even for a TC04? But it's definitely listed in the ACL NZ catalog for the 1.8L Turbo Cordia and Turbo Starions.
ACL part number for 3 bolt TC06 downpipe flange gasket
-
- nearly postwhore
- Posts: 1446
- Joined: Sun Jun 19, 2005 7:27 pm
- Location: Sunny Brisbane Australia!
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
VL commodore turbo dump pipe to exhaust system 3 bolt gasket is the perfect size, only thing you have to do is cut a flat on the bottom to miss the wastegate cover plate on the starion turbo.
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
-
- nearly postwhore
- Posts: 1446
- Joined: Sun Jun 19, 2005 7:27 pm
- Location: Sunny Brisbane Australia!
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
same goes for dump pipe flanges, VL turbo ;)
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
-
- nearly postwhore
- Posts: 1446
- Joined: Sun Jun 19, 2005 7:27 pm
- Location: Sunny Brisbane Australia!
even easier.... over the weekend i brought some sheet metal exhuast gasket paper for 10 bucks.... just use tin snips to get your pattern and todo so just cut out a piece small enough to get down there and use a small mallet to indent the shape you want.
done the silly wastegate plate as well
I done this cause nowhere had a listing for it, and I have a tc06 instead of tc05
done the silly wastegate plate as well
I done this cause nowhere had a listing for it, and I have a tc06 instead of tc05
-
- nearly postwhore
- Posts: 1446
- Joined: Sun Jun 19, 2005 7:27 pm
- Location: Sunny Brisbane Australia!
Who is online
Users browsing this forum: No registered users and 15 guests