Rota Grid Wheels from Otomoto

bigd · Post by **bigd** » Sat Jan 05, 2008 6:21 am

Has anyone seen the rims on otomoto lately? Only prob for me is they won't reply to my emails about shipping to NZ. If any of you have hook-ups there I would be stoked if you could find out whether they'd ship a set to me!

http://www.otomoto.com.au/showroom.htm

Cheers :beer

redzone · Post by **redzone** » Sat Jan 05, 2008 10:02 am

yeah i know ben and grant pretty well i'll ring em on monday for ya :beer

ps there was a thread about these a while back

Starion_Turbo · Post by **Starion_Turbo** » Sat Jan 05, 2008 1:59 pm

Is there clearance on a starion's front to run 8" width with +10 offset?
They'd sit 17mm further in and 33mm further out,
I thought I measured about a 12-14mm inner clearance over stock
once on the front.

Anyone?

bigd · Post by **bigd** » Sat Jan 05, 2008 2:18 pm

Cheers Redzone!

I'm pretty sure clearance isn't an issue but I can't double check at the mo!

redzone · Post by **redzone** » Mon Jan 07, 2008 12:22 pm

Starion_Turbo wrote:Is there clearance on a starion's front to run 8" width with +10 offset?
They'd sit 17mm further in and 33mm further out,
I thought I measured about a 12-14mm inner clearance over stock
once on the front.

Anyone?

considering one of my cars has a 17X9 with 0mm offset on the front and clears fine, i'd say YES!

oh yes and garry carrol's car has 18X8.5's with 12mm offset on the front

Starion_Turbo · Post by **Starion_Turbo** » Mon Jan 07, 2008 3:24 pm

Ok

I found the reason why I measured 12mm clearance.
With 14" wheels 8" wide part of the steering linkage would hit however with wheels 16" and bigger this part would likley sit inside the cavity of the rim.

Austarion

Rota Grid Wheels from Otomoto

Rota Grid Wheels from Otomoto

Who is online