Austarion

Hey guys, im wanting to inject some torque into the old JA Staz, what are some good mods you guys have done to achieve some good torque improvements?

Thanks

intercooler + a few more PSI

oped wrote:Hey guys, im wanting to inject some torque into the old JA Staz
Thanks

4G54 that all I'm gunna say

Of coursde if it's an "Old Stazz" as you so delicately put it, adding torque via mods will probably kill it! :D

perfect mod it blow it up then spend ten times what its worth and years putting it back together lol maybe ditch the tco6

V8

Alspos wrote:V8

You only say that Al to wind people up. LOL

Regrind cam

Boost = Torque

depends whether u mean torque or bottom end.. coz u can quite easily get more torque up high with more boost and a cooler as brendan said....

getting more bottom end requires something like a TD05H 16G....


how fast do u wanna go?

how much do u wanna spend........

Im just looking to have power at the bottom to around 80-100kmph, not too fussed after 100kms, because i never get to a track to race around, just racing cars at the lights sort of thing i dont really get over 100.
And well my conception of what torque is: pulling power, so im figuring, with higher torque - engine can pull my car faster - blistering low end acceleration :D

oped wrote:Im just looking to have power at the bottom to around 80-100kmph, not too fussed after 100kms, because i never get to a track to race around, just racing cars at the lights sort of thing i dont really get over 100.
And well my conception of what torque is: pulling power, so im figuring, with higher torque - engine can pull my car faster - blistering low end acceleration :D

Dave do u think the tc05 I am selling is the answer ???
It should have great response & boost quickly at lo revs

If he is after good midrange at the expense of a bit of top end (if you dont like revving much past 5k your fine) then the TC05 with a cooler and exhaust would be great,.

Yep, TC05 is quick to spool straight off. Give it an MPI and nice computer...