Page 1 of 1

Speed Actuator?

Posted: Fri May 04, 2007 7:50 pm
by chiefbrody
Guys, the speed actuator (the bit on the drivers side suspension turret)

Is it for the cruise control?

And if so - can I just unplug and junk it?

Its taking up valuable room where I want my oil catch can to go, when I rip up the airbox.

Posted: Fri May 04, 2007 10:37 pm
by Starion_Turbo
Hi

Our starions don't come with any kind of cruise control.

Define Rip up the air box, as this must be retained unless runnin aftermarket ECU.

Posted: Fri May 04, 2007 11:03 pm
by chiefbrody
Airbox has the oil catch on the side.

Its my long winded route for tidying things up and moving intercooler pipes.

I'm moving the windscreen washer bottle from under the airbox to the bulkhead

to free up room to move the airbox down

to vent some air to there from the frotn spoiler

to move it down I have to remove the oil catch cannister off the side so I can cut the box up.

standard box will be retained, because its got the air mass lark in it :D but just need to relocate and cut it up.

then aftermarket oil catch can can go on the drivers side suspension turret

but at the moment the speed actuator is in the way, so I wanna junk it, cos who needs cruise control?

Aaaaaaand breathe :D


That make sense?

Posted: Sat May 05, 2007 12:01 am
by chunkhead
Pictures always help! :D

Posted: Sat May 05, 2007 12:10 am
by chiefbrody
I'm at work but this should do

just above the blue hose coming out the turbo, its the bit with the cables going into it on the front side of suspension turret, half hidden by the intercooler hose.

Thats where I wanna mount the oil catch can when I cut the airbox up.

I'm assuming that you dont know the bit I'm on about cos you dont have cruise control, and therefore it is something to do with cruise control and I can junk it :) big assumption but I guess I'll find out when I take it off...

Image