Austarion

Heya !

My friend have a problem with a few wires -nobody knows where they should be put in.




And this (where this from?):





And the last question:
What wires should be connected to "+" and "-" of the coil?

THANKS for any help, on behalf of my friend.

Regards, Maciej

The first picture:
The white wire plugs onto the + of the battery. The large roll of white wire bunched up is the shunt for the Ampere meter in the dash.

Second picture:
Hard to tell, need a picture from another angle.

Third picture:
Same as first picture.

Fourth picture:
Is a filter capacitor mounted on the coil.

Abalistic wrote:The first picture:
The white wire plugs onto the + of the battery. The large roll of white wire bunched up is the shunt for the Ampere meter in the dash.

Second picture:
Hard to tell, need a picture from another angle.

Third picture:
Same as first picture.

Fourth picture:
Is a filter capacitor mounted on the coil.

thanks a lot!
better "second pic" I will put in a few days.

Abalistic wrote:Fourth picture: Is a filter capacitor mounted on the coil.

which pole (-/+)

The eye connector goes over the negitave terminal. You'll find the wire the other end plugs into somewhere, i think you'll find its the tacho feed.