Page 1 of 1
Purchasing intercoolers
Posted: Fri Feb 09, 2007 9:57 am
by Tezstaz
Hi everybody i have just aquired my dreamcar and i want to put an intercooler into my Starion.Could anybody advise me the best and most affordable intercooler can be bought in Australia Preferably Melbourne Thanks all Terry
Posted: Fri Feb 09, 2007 10:38 am
by flav
Put some decent cash aside if you want a decent job. We use Hybrid or HKS coolers. Come and see some fitted over here if you like. Will need about 5 weeks before we can fit u in.
Posted: Fri Feb 09, 2007 11:43 am
by Oscar-the-Grouch
If you decide to go ORIGINAL LOOK
I can supply you with an US Spec Starion Intercooler and ALL pipes to fit. Minor triming of metal is required to accomodate the pipes and the rotation of the compresor houisng of the turbo is required to point the opening towards the guard, but pretty much bolt in.
Cost will be determined by the Intercooler I have at the time of your order its condition (YES they are USED and 16+ years old) and model. There were two models an earlier model (16 rows) and later model higher flowing (14 rows) Same size overall but the cooling tubes were larger on the 14 row units.
Estimated cost for Intercooler and pipes and hoses is USD$225-$275
AUD$298-$360
NZD$335-$415
depending on which cooler you opt for.
And your choice of posting speeds:
Airmail Parcel 5 - 13 Days USD$97/AUD$129/NZD$150
Surface Parcel 5 - 7 Weeks USD$45/AUD$63/NZD$70
Let me know if you have any questions
Oscar (The Grouch )
Posted: Fri Feb 09, 2007 2:07 pm
by decoy
the original cooler will require you to mod your turbo a little if you have a JA or JB.
Posted: Fri Feb 09, 2007 2:30 pm
by lowlancer
Oscar-the-Grouch wrote:If you decide to go ORIGINAL LOOK
I can supply you with an US Spec Starion Intercooler and ALL pipes to fit. Minor triming of metal is required to accomodate the pipes but pretty much bolt in.
Cost will be determined by the Intercooler I have at the time of your order its condition (YES they are USED and 16+ years old) and model. There were two models an earlier model (16 rows) and later model higher flowing (14 rows) Same size overall but the cooling tubes were larger on the 14 row units.
Estimated cost for Intercooler and pipes and hoses is USD$225-$275/AUD$298-$360 depending on which cooler you opt for.
And your choice of posting speeds:
Airmail Parcel 5 - 13 Days USD$97.00
Economy (Surface) Parcel Post 5 - 7 Weeks USD$45.00
Let me know if you have any questions
Oscar (The Grouch )
Can you quote in NZD? And will it be ok with the 4G63?
Posted: Fri Feb 09, 2007 3:31 pm
by Starion VR4
I have STD Staz Intercooler here in Oz if U need it
Posted: Fri Feb 09, 2007 4:49 pm
by RiceThief
If you want a cheaper option you could always go for the intercooler just jap sells for around $175.
Posted: Fri Feb 09, 2007 5:58 pm
by nzgsr
lowlancer if u want a factory cooler setup i should have one for sale in about a month complete with alloy crossover from a dash engine would match your motor
Posted: Fri Feb 09, 2007 7:36 pm
by Oscar-the-Grouch
lowlancer wrote:Oscar-the-Grouch wrote:
Can you quote in NZD? And will it be ok with the 4G63?
DONE !
Check original post. and YES it will with the minor mods mentioned above.
Oscar