How do you make turbo spool faster?
Posted: Sat Jan 27, 2007 6:40 pm
How do you make your turbo spool faster. i.e 2800rpm
Page 1 of 2
Posted: Sat Jan 27, 2007 9:47 pm
Fit a bov and pull of you're Exhaust! :beer
Posted: Sat Jan 27, 2007 10:28 pm
ball bearing :beer
yeah baby
Posted: Sat Jan 27, 2007 10:34 pm
B/B turbo calculated for your engine, always helps to
know someone in the game. ASK the pro`s
Cheers: Phil.
know someone in the game. ASK the pro`s
Cheers: Phil.
Posted: Sat Jan 27, 2007 10:45 pm
hope you keep the dump pipe, hot gas aimed at firewall not a good idea.silo wrote:Fit a bov and pull of you're Exhaust! :beer
larger diam dump 2.5" or 3" and mandrel exhaust.
Posted: Sun Jan 28, 2007 9:52 am
If you have an intercooler, fit larger hard piping. (same size as TB).
Also maybe port out your exhaust manifold as well, or if you get a BB turbo, get a custom made length tuned manifold.
Also maybe port out your exhaust manifold as well, or if you get a BB turbo, get a custom made length tuned manifold.
Posted: Sun Jan 28, 2007 7:20 pm
EVO3 turbo 
Posted: Sun Jan 28, 2007 7:27 pm
Disconnect the airflow metre and remove the wastegate pipe, not to mention the overboost wire from the boost sensor.........................only if your game!!!!!!!!!!!!!!!!
Posted: Sun Jan 28, 2007 9:35 pm
Dont think u'd get anything in the way of gains with the air flow meter removed, if it ran at all.Bitza wrote:Disconnect the airflow metre and remove the wastegate pipe, not to mention the overboost wire from the boost sensor.........................only if your game!!!!!!!!!!!!!!!!
Posted: Sun Jan 28, 2007 11:22 pm
agressive ignition timing low in the revs
a good electronic boost controller
a good electronic boost controller
Posted: Mon Jan 29, 2007 12:19 am
100ron fuel, short intercooler piping, or atleast shorter than what you have now, bigger dump pipe as mentioned earlier.
Best tip > shorter intercooler pipes.
Best tip > shorter intercooler pipes.
Posted: Mon Jan 29, 2007 8:42 am
50 shot.
Phil
Phil
Posted: Mon Jan 29, 2007 9:05 am
No one has metioned advancing the cam yet...
Or get a cam regrind with an early opening exhaust lobe...
That will help spool the turbo earlier... :beer
Or get a cam regrind with an early opening exhaust lobe...
That will help spool the turbo earlier... :beer
Posted: Mon Jan 29, 2007 9:11 am
Nitrous, hardpipes, timing, cam, exhaust, port and polish of manifold and head.
Posted: Mon Jan 29, 2007 10:18 am
I have a new cam specially ground to spool up early 4 better bottom end response .Pls contact me if interestedTOMSUN wrote:No one has metioned advancing the cam yet...
Or get a cam regrind with an early opening exhaust lobe...
That will help spool the turbo earlier... :beer