Oil Leaks!

All technical questions and answers regarding starions, being modifications to maintenance.
Post Reply
User avatar
iXNAY
nearly postwhore
Posts: 1414
Joined: Sun Jan 30, 2005 2:30 pm
Location: Bathurst

Oil Leaks!

Post by iXNAY »

hey all,

does anyone have a starion that does not leak oil i swear i cant stop it coming out its ridiculous is it stopable?!
SR20 powered starion what have I done..... :P
User avatar
Cookiemonster
Mother Goose
Posts: 3177
Joined: Thu Jan 08, 2004 4:33 pm
Location: Sydney

Post by Cookiemonster »

Glen GSR's starion doesn't leak. :wink:
User avatar
sigmaproject
Big Dorifto
Posts: 91
Joined: Fri Jan 16, 2004 10:34 am
Location: Maitland

Post by sigmaproject »

I think its called crankcase pressure.
And the puney little pcv valve doesnt help
Maybe a big pipe into a catch tank.
User avatar
iXNAY
nearly postwhore
Posts: 1414
Joined: Sun Jan 30, 2005 2:30 pm
Location: Bathurst

Post by iXNAY »

And the puney little pcv valve doesnt help
whats this valve u talk of? the one way valve on the head?
SR20 powered starion what have I done..... :P
User avatar
Cookiemonster
Mother Goose
Posts: 3177
Joined: Thu Jan 08, 2004 4:33 pm
Location: Sydney

Post by Cookiemonster »

iXNAY wrote:
And the puney little pcv valve doesnt help
whats this valve u talk of? the one way valve on the head?
Yep.
User avatar
iXNAY
nearly postwhore
Posts: 1414
Joined: Sun Jan 30, 2005 2:30 pm
Location: Bathurst

Post by iXNAY »

how can u make it bigger its a tapped thread isn;t it?

will putting a reducer in there with a bigger valve on it make it any better?

also will putting a bigger pipe from the sump too the seperator help any?

regards
SR20 powered starion what have I done..... :P
13secJA
Lil' Dorifto
Posts: 49
Joined: Sun Jun 11, 2006 9:28 am
Location: gold coast
Contact:

unstoppable

Post by 13secJA »

My old motor used to leak from just about every part of the motor. It even used to blow oil threw the breather hose into the air box which then would leak out the cold air hole I cut in it, then running into the chassis rail and leaking back out the chassis drain hole half way down the car. So when I built a new motor I replaced every single Gasket ensured all surfaces were clean and flat and used high quality permatec and silicon. Now it drips one tiny little drip a day just to piss me off I think. I don’t know where from I don’t know how it’s possible; I think it’s just the way Starions are!
El-Jayz Speed Shop sells a great selection engine internals, Turbo Chargers, Waste-Gates, Intercoolers, Manifolds, Blow-Off Valves, Boost Controllers, Fuel pumps, Injectors, Pipe Work, Silicone Hoses, T-Bolt Clamps, Gaskets etc.
User avatar
2lturbs
I like starions
Posts: 121
Joined: Fri Jul 28, 2006 10:04 pm
Location: adelaide

Post by 2lturbs »

spend 1500 bux on a full rebuild use gasket goe on the roccer cover coz that leaks is ur rear and front crank seal leaks because of the grove in the crank left over from the seal goin round and round...hammer the seal in half way befor the grove the your garenteed no leaks...most of the time they put a sleave over it but thats the cheap way out,and 1500 will get u every thing u need plus crank ground down and linished....cromeolly rings bed in fast say 500km non synthetic oil then bobs ye fuking uncle...get the balance shfts removed get the oil jernal blockd up sweet more oil pressure have fun
my starion has hit a tree and a roundabout and she loves it to.....
User avatar
rallidave
Enthusiast king
Posts: 889
Joined: Mon Feb 27, 2006 11:14 pm
Location: cairns

Post by rallidave »

ive got a little breather filter on mine
k and n $35
85 JB 4g63 SOHC
94 EVO2 4g63 DOHC
i wanna go fast
User avatar
JPC
almost postwhore
Posts: 1016
Joined: Fri Feb 13, 2004 9:25 pm
Location: Perth, WA

Post by JPC »

2 of mine don't leak a drop, the other leaks a little - only requires a cleanup every 3 or 4 months. Maybe I'm just lucky :wink:
Starion nutter since 1988...
1983 JA, 1984 JA, 1985 JB (all rego'd, all running :D )
Bitza
I've been here before
Posts: 244
Joined: Mon May 29, 2006 1:53 pm
Location: Adelaide SA

Post by Bitza »

The only place my Starion leaks form is the rear of the rocker cover (can't be bothered fixin it cos its minimal) and it flows out of the power steering pump and drag box, can't drive more than 40kms without a refill!!!!!!
User avatar
Glen GSR III
guess its me thats broke
Posts: 581
Joined: Wed Jan 11, 2006 7:34 pm
Location: Toowoomba, Queensland

Post by Glen GSR III »

Cookiemonster wrote:Glen GSR's starion doesn't leak. :wink:
Glen GSR's starion doesn't do much really. Kind of just sits there all sad-like. Its the undercoat grey that makes it look bad. :(
82 GSR III starion (respray nearly complete!)
83 JA Starion...Daily Driver
01 KTM 520 trail bike (reason the staz isnt finished yet)
User avatar
SIR GSR
Loose Cannon
Posts: 1359
Joined: Thu Oct 06, 2005 12:00 pm
Location: On boost in Cairns

Post by SIR GSR »

Mine didn't used to leak....Was perfect. I went over it every day, just to make sure
KBS Drift Team
0409 487 321
Image
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests