Page 1 of 1
intercooler size???? large pics
Posted: Sun Jul 02, 2006 7:26 am
by ukstariont3
hi, i am going to fit a diffrent intercooler. it is the same width, but 3x as deep. will this is make a big diffrence??????
i am running around 20psi boost, 2.5" s/steel ex, large turbo, standard cam, port/polished head, forged pisatons etc.
any help would be great, :beer
Dave
Posted: Tue Jul 04, 2006 7:50 am
by ukstariont3
heres some pics. fitted it today.
bit deeper than standard
view with the rad out
fills he gap quite nicely, not too in your face.
Re: intercooler size???? large pics
Posted: Tue Jul 04, 2006 7:40 pm
by RiceThief
ukstariont3 wrote:hi, i am going to fit a diffrent intercooler. it is the same width, but 3x as deep. will this is make a big diffrence??????
i am running around 20psi boost, 2.5" s/steel ex, large turbo, standard cam, port/polished head, forged pisatons etc.
any help would be great, :beer
Dave
How much difference the thicker cooler will make will depend on the type of core. However the thicker core should improve cooling efficiency.
Posted: Wed Jul 12, 2006 11:13 am
by 85_cordia_gsr
i'd recomend gettin sum mandrel bends in there, the right angle bends you have at the moment wouldnt be helping much in the power department...
Posted: Wed Jul 12, 2006 5:04 pm
by mrb1
You really need a cam as well to get it to haul. My car increased 30hp at the wheels at 7000 RPM with a cam change! That's using a stock head!
Posted: Wed Jul 12, 2006 8:42 pm
by Starion_Turbo
i'd like to hear what cams are availiable, gains, price etc, and weather they would work with stock ecu.
Posted: Thu Jul 13, 2006 4:33 pm
by Junkers
What is the rev range suited to with that cam mrb1?