Austarion

heya

im looking for a BES turbo timer wiring diagram for the timer below
can anybody help plz?


thanks

looks like one my mate had in his cordia it just had a plug that plugged straight into the loom

Is it the 3 wire or the 4 wire version...?

Once you confirm this, I will be able to help you out.

this is from my Greddy one, its the same wiring i belive as my greddy one just pluged straight into the same colours - altho i think that the bes ones may have a green ground

it has 3 wires
Blue, Red, Black


cheerz

Here's the wiring for the ignition, I wired mine up blindly using only a test light till it worked! There's not that many configurations!

http://forums.austarion.com/viewtopic.p ... urbo+timer


Also, you don't have to host your pics elsewhere for Austarion.com, just click on the "Image Upload" link at the top of every screen and then cut and paste the link to show the image!

sweet
cheers 4 that

so it has black, blue and red wires
what do these goto exactly for a BES timer?

thanks heaps

heya peepz

so theres black, blue and red wires
which wires on the starion do i tap these onto under the dash near the steering column?

PLZ help asap as i would love to have it working

I'm going to be having a look at my turbo timer tomorrow. If you can wait I'll let you know where the wires goto.

:beer

I just had a quick look (god it's a mess under there)
Mines wired near the plug fror the ignition switch gos into the loom.
I'ts a 6 pin plug with 5 wires going to it.
the wires I have are Black/Red, Black/White, Black/Yellow, Black, Blue.

Blue from Timer ->Black/White
Yellow from Timer -> Blue
Red from Timer ->Black
Mines a 4 wire one and the black wire goes somewhere else besides the ignition wires.

My wiring is a mess, a previous owner ran wires everywhere and they are all different colours.
use the post the chuckhead posted aswell
Hope this helps

:beer

the black on my timer was earthed out so i take it thats right
i will try wiring mine like yours now and let ya know

thanks heaps buddy