Air filter?

All technical questions and answers regarding starions, being modifications to maintenance.
Post Reply
filiboy
I like starions
Posts: 119
Joined: Thu Apr 13, 2006 9:04 pm
Location: Bulgaria

Air filter?

Post by filiboy »

sry for the stupid question, but I didnt find a solution in the "search" area, so I put a topic. I want to put bigger turbine, and for that I think to put sport air filter also. U know that there is some electronic in the air filter box, and when I remove it the ECU stops the engine, and the worst is that the ECU is not programmable. is there any possibility to avoid that or I have to change the ECU with newer one (I still dont have MPI). 10x for the answers
User avatar
Cookiemonster
Mother Goose
Posts: 3177
Joined: Thu Jan 08, 2004 4:33 pm
Location: Sydney

Post by Cookiemonster »

The factory ECU requires the air flow meter (MAF) that is located in the air filter housing. No way around it.

You have to go aftermarket ECU if you want to remove the MAF.
User avatar
jrod82
StarioNZ.com
Posts: 985
Joined: Tue Jan 13, 2004 1:02 pm
Location: Helengrad, Aotearoa

Post by jrod82 »

But you can replace the MAF with another, right? That's what the yanks call the "1G MAS" mod?
Image
douglovin
[P] Plater austaz
Posts: 24
Joined: Fri May 05, 2006 3:37 pm
Location: Conroe, Texas

Post by douglovin »

I have to keep that ugly big metal box on my car? I can't remove it?
filiboy
I like starions
Posts: 119
Joined: Thu Apr 13, 2006 9:04 pm
Location: Bulgaria

Post by filiboy »

10x for the answers
User avatar
fr335tyl3r
I'm Sorta Reformed!
Posts: 2073
Joined: Tue Apr 13, 2004 3:07 am
Location: Baulkham Hills, NSW

Post by fr335tyl3r »

9x filiboy. no worries.

doug - u do unless ure going to run an aftermarket ecu
Multipoint Conversion Underway
http://starions.fr33z3.net/mpi/
User avatar
honest_jim
Dorifto!
Posts: 52
Joined: Sun Aug 28, 2005 6:22 am
Location: uk

Post by honest_jim »

:oops: what does 10x and 9x mean? am i getting too old or something?
:?
Starion 2000 EX.. bosch fuel pump, sard dumpvalve, knN drilled air box, Haltech F5 + 2 injectors, turbosmart FCD + Dual stage boost controller, tublar turbo header, turbo back 2.5" stainless exhaust 4.5" tip, Innovate MS wideband A/F meter.
SOWTZ
Mine is bigger than yours
Posts: 331
Joined: Wed Apr 27, 2005 7:53 pm
Location: Melbourne

Post by SOWTZ »

Is the greddy e-manage able to work with the Satz ecu? says in the book (jap spec, cant understand) works with 4G63, but it might just be the evo/vr4 ecu it works with. Has anyone used one?
I have a car. I use it to drive to work, to drive to work I need petrol, petrol cost money, I must work to make this money… it’s a vicious cycle!
RiceThief
my mangina paid for my staz
Posts: 2129
Joined: Thu Jan 15, 2004 1:23 pm
Location: Brisbane

Post by RiceThief »

SOWTZ wrote:Is the greddy e-manage able to work with the Satz ecu? says in the book (jap spec, cant understand) works with 4G63, but it might just be the evo/vr4 ecu it works with. Has anyone used one?
I believe you can, quest will be able to help you out with that.
Starions are a disease, the only cure is poverty.

Project Grand Sport Racing Five
hoongirl
Ace Girl Retraction
Posts: 1144
Joined: Thu Jan 08, 2004 2:18 pm
Location: Sydney
Contact:

Post by hoongirl »

10x = thanks? Not sure though I'm just guessing here....
honest_jim wrote::oops: what does 10x and 9x mean? am i getting too old or something?
:?
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests