Page 1 of 1
Vapor Lines.
Posted: Mon May 22, 2006 11:16 am
by douglovin
Are they required? Can I just remove them. I don't want to have to add extra on my fuel cell.
Posted: Mon May 22, 2006 1:36 pm
by Alspos
Not a good idea to remove them. Vapour will build up and pressurise the tank. Or conversely, cold night the tank sides will want to pull inwards and could buckle (extreme case of course.)
Or fit a vented fuel cap, but on a fuel cell inside the car you probably would want to avoid that too.
Posted: Mon May 22, 2006 2:13 pm
by douglovin
Ok sounds good. I guess I will leave it on and just add another fitting on my fuel cell. Sorry for the dumb question ;p
Posted: Mon May 22, 2006 2:40 pm
by Alspos
Dumber if you don't ask.
Others may have had more experience than I have. Couple on here have cells.
Posted: Mon May 22, 2006 4:51 pm
by AB
I don't know if this helps or not but in NZ Cordia's came stock with no emissions gear so there's no charcoal canistor or any vapour lines to or from the fuel tank. (I assume this is what your talking about?)