Page 1 of 1

My starion and the engine

Posted: Tue Feb 21, 2006 9:57 am
by typer
well i took the head of the engine and guess what.. isn't there just a 2-3cm metal ball on top off the piston... also there was a 2 smaller balls.. i don't know what that is or where that came from.
So the pistonshaft is broken or bent
(that shaft that holds the piston from the crankshaft, dont know what that is called)
And the piston is cracked... theres a big hole on it... on the top...
I checked the turbine, and it seems to be ok...

So i know a guy that owns a 2.6 Liter engine and wants so much for it that i just want to keep my 2.0Liter...

Can i use piston and the pistonshaft or what ever that is call'd from a Eclipse 4G63 ?

And where can i buy a better ones that handles more power if i want to buy a better turbo in the future? do i need something else in the block to handle maby 300hp ? a piston and pistonshaft.. ??

Posted: Tue Feb 21, 2006 6:55 pm
by RiceThief
The metal things that hold your piston are called con rods, the metal pins that hold your pistons to the conrods are gudgeon pins. When i damaged my engine from pinging 'only' the ring lands broke off, so you must have had some serious detonation in there to make a hole in the piston, which chances are your conrod/s would be bent too. Either that or something went through it like a valve but you said they look fine, and from memory the reliefs in the pistons would mean the valves wouldnt it anyway. Those metal balls are probably the left over of your piston?

You can use the pistons from the eclipse 4g63 but your engine will no longer be free spining i think the term is, in that if you snap a timing belt your valves will go through your pistons. Also there are 2 sizes when it comes to gudgeon pins in the eclipse 4g63, 21mm and 22mm, 1g or first generation is 21mm and the 2g or second generation are 22mm. Starion gudgeon pins are 22mm by the way.

Posted: Tue Feb 21, 2006 7:45 pm
by redzone
i think he means the con-rods (short for connecting rods typer)

bent/snapped con-rod and damaged piston? would have damaged the block aswell??

have a look at steve`s (starion gsrvr) post in the for sale section. he has a complete engine to give away, located in england so shipping not that bad compared to here...

Posted: Tue Feb 21, 2006 11:32 pm
by typer
yes i'm talking about connecting rods, didn't know what that was called in english... :)

Posted: Wed Feb 22, 2006 8:09 pm
by RiceThief
Sorry didnt double check my post, first post has been modified, re the engine redzone is talking about click http://forums.austarion.com/viewtopic.php?t=5685