Drive Gear Bearing Retainer Gasket

[CussCuss]

assuming i got the name right and you know what im talking about, does anyone know how thick this is supposed to be? Auto 1 dont stock one so we made one out of gasket paper, and then realised that it was possibly too thick and sure enough the original gasket measures at 0.2mm, and the paper we used was 0.4.

Now making another isnt a problem, its just that the gasket may have been a bit thicker to start with and compressed so we dont know what size it should be (acceptable clearance is 0 - 0.1mm).

So anyone know the size of the gasket?

Thanks