Oil from the turbo
Oil from the turbo
I am pretty sure this means I have a blown turbo seal, but I just thought I'd ask, cause its a turbo I just bought and I am not happy.
There is oil coming out between the dump pipe and the exhuast. Bad bad bad, and everytime I start up the car too much oil drips out from around the bottom of the turbo I think, but I can't work out exctly where its coming form. Thanks for your help
There is oil coming out between the dump pipe and the exhuast. Bad bad bad, and everytime I start up the car too much oil drips out from around the bottom of the turbo I think, but I can't work out exctly where its coming form. Thanks for your help
- Cookiemonster
- Mother Goose
- Posts: 3177
- Joined: Thu Jan 08, 2004 4:33 pm
- Location: Sydney
Re: Oil from the turbo
while you are taking the hose to the airbox off to check for shaft play, check for oil as well. also check your crossover pip (turbo outlet to injection) for oil as well. that is where i found oil when my turbo seals were blown.
- Cookiemonster
- Mother Goose
- Posts: 3177
- Joined: Thu Jan 08, 2004 4:33 pm
- Location: Sydney
second hand from perth, I'm in adelaide. No chance of taking it back. I was going to check the oil return line, because thats sort of where it looks like most of the oil is coming from. But then the oil in dump pipe/ exhaust conused me. It would need a fair bit of pressure to squeeze through you would think?
Just very confused, first time i've taken off a turbo and put one on, so not sure if i've screwed something very very simple up.....
Just very confused, first time i've taken off a turbo and put one on, so not sure if i've screwed something very very simple up.....
- Cookiemonster
- Mother Goose
- Posts: 3177
- Joined: Thu Jan 08, 2004 4:33 pm
- Location: Sydney
- Cookiemonster
- Mother Goose
- Posts: 3177
- Joined: Thu Jan 08, 2004 4:33 pm
- Location: Sydney
oil use
To check the turbo go with the guy that suggested checking the crossover pipe for oil. When you remove the pipe (simple job) if you find oil in the pipe and pooled just inside the compressor, a rebuild is in order . You could have external leaks as well. Used turbo's are usually a nightmare if you dont overhaul them before installation.
Who is online
Users browsing this forum: No registered users and 27 guests